DYMO 6000
Electronic
Labelmaker
User’s Guide
ESSELTE DYMO
Contents
Introduction................................................4 Formatting the label.................................22
M
Using the
key ............................22
Caring for your Labelmaker ......................5
Label sizes .....................................23
Auto scaling....................................23
Character sizes ..............................23
Text styles ......................................25
Mixed styles and pages ..................25
Mixing auto-scaling and
Preparing for use .......................................6
Unpacking ........................................6
Power Supply ...................................6
Battery life ....................................7
AC adaptor ..................................7
External Interface Socket..................7
fixed size text..................................26
Colour ............................................26
Creating your first label .............................8
Bar codes .................................................27
Changing cassettes .................................28
Description of keys ..................................10
The keyboard .................................10
The function keys ...........................10
The main typewriter-style keyboard 12
International characters ..................13
Printing .....................................................30
Cut on/off lever ...............................30
Printing a label................................31
Multiple copies................................31
Continuous labels ...........................31
Consecutively numbered labels ......32
Consecutively numbered bar code
Display and indicators.............................14
LCD display ....................................14
Tape widths and
display formats ...........................14
Warning symbols .......................15
labels..............................................33
Printing a fixed length label .............33
Using fixed size characters with
Memory ....................................................15
Saving a label to memory ...............15
Recalling a label from memory .......15
Removing a label from memory ......16
Search............................................16
a fixed length label..........................34
Troubleshooting.................................34
Maintenance .......................................36
Replacing internal batteries ..............37
Symbols ...................................................17
Creating a label ........................................18
Creating a new label .......................18
Keying in ........................................18
Display window...............................19
Inserting characters ........................19
Deleting characters.........................20
Storing a label in the memory .........20
Deleting a label...............................20
Inserting an existing label from
Accessories and spare part code
numbers .............................................38
memory ..........................................20
Editing an existing label ..................21
DYMO® 6000 Labelmaker
3
DYMO 6000 Electronic Labelmaker
Introduction
Thank you for choosing the Dymo 6000 Electronic Labelmaker.
This machine enables you to create a wide variety of high quality
self-adhesive labels in numerous colour combinations.
Facilities are arranged so that simple labels can be created quickly
and easily, whilst more advanced features are available using
additional key operations.
Tape cassettes are available in Clear, White, Red, Blue, Yellow or
Green in widths 6mm (14"), 12mm (12") or 19mm (34"), with ink ribbon
cassettes available in Black, Red or Blue.
Special features of model 6000 Labelmaker include:
• Normal, bold or italic text from the standard Helvetica font.
• Text can be arranged horizontally,
,
underlined , outline or within a line box or a mix of these on any
label.
• Creation of bar code labels (to a number of bar code standards),
with or without accompanying text.
• Power is supplied from internal re-chargeable batteries or from
an external AC adaptor (supplied).
• Labels can be up to four lines deep, with automatic re-sizing of
the text to fit the width of label selected.
• Text can be ranged to the left, right or centred on the label.
• Automatic label cut-off.
• Labels are tab-cut for easy removal from the backing tape.
• Multiple tab cut labels can be produced, enabling a string of
labels to be be created for removal and fixing ‘off the roll’.
• Auto shut-off facility removes power after one minute to conserve
battery power if the machine is standing idle.
4
DYMO® 6000 Labelmaker
Caring for your Labelmaker
Use only accredited DYMO replacement parts in your 6000
Labelmaker.
DO NOT expose the Labelmaker, AC adaptor or cassettes to:
• strong sunlight
• rain or moisture
• high heat or humidity
• dust.
DO NOT put:
• heavy objects on top of the Labelmaker
• any foreign objects into the cassette compartment
• rubber or vinyl objects on the Labelmaker for a long time, as it
may become stained.
DO:
• clean the Labelmaker with a soft, dry or damp cloth; do not use
any solvents
• use only the special AC adaptor designed for the DYMO 6000
Labelmaker
• disconnect from the AC power supply and remove the cassettes
if the Labelmaker is not to be used for a long period of time
• clean the print head and pinch roller regularly — see
‘Maintenance’, page 36.
DYMO® 6000 Labelmaker
5
Preparing for use
Unpacking
Remove the Labelmaker from the packaging carefully; observe any
warnings or packaging information. Retain all packaging for
possible future use.
The internal batteries will have been partially charged during
manufacture.
Power Supply
IMPORTANT: For maximum battery life, the internal batteries
should be charged for AT LEAST 24 hours before using the
machine on battery power for the first time.
Connect the round plug from the AC adaptor into the power input
socket on the Labelmaker (see Fig. 1), then plug the AC adaptor
into a convenient wall socket. Switch on at the wall socket and
leave it on charge for AT LEAST 24 hours.
You can use the Labelmaker with power from the AC adaptor
during the initial 24-hour charging period.
Connect the AC
adaptor plug here
External interface
socket
Fig. 1 — Rear/underside view
6
DYMO® 6000 Labelmaker
Battery life
When used away from the AC adaptor, the internal batteries will
provide up to four hours of keyboard operation (editing or creating
labels) or enough power to print up to two tape cassettes. Any
labels stored in the memory will be retained for up to six weeks on
a full charge.
AC adaptor
The Labelmaker can be connected to the AC supply, using the AC
adaptor, for continuous operation. The AC adaptor will also charge
the internal batteries all the time it is connected to the AC supply. If
you have been using the Labelmaker from battery power, re-
connect it to the AC adaptor after use to ensure that the batteries
are always fully charged. Note that the batteries cannot be
overcharged.
External
Interface
Socket
The external interface socket at the rear of the Labelmaker enables
you to plug in a range of optional cartridges.
DO NOT ATTEMPT TO CONNECT ANYTHING OTHER
THAN AN APPROVED DYMO CARTRIDGE FOR THE 6000
ELECTRONIC LABELMAKER TO THE EXTERNAL
INTERFACE SOCKET.
DYMO® 6000 Labelmaker
7
Creating your first label
You will no doubt be anxious to see what your new Labelmaker
can do. Before we go on to explore the many advanced features of
the DYMO 6000, follow these simple steps to create your first label.
1. Connect the AC adaptor, plug in and switch on at the wall
socket.
2. Open the cassette compartment lid and check that both the
tape and ink ribbon cassettes are fitted correctly – see Fig. 2.
Ensure tape and
ribbon are positioned
as shown between
print head and pinch
roller.
TAPE
CASSETTE
INK RIBBON
CASSETTE
Print head
Fig. 2— Correct label tape and ink ribbon paths.
If no cassettes are installed, or you need to change one of them,
see ‘Changing cassettes’, page 28.
ON/OFF
3. Close the lid, then press
to switch the power on.
The display should look like this:
AUTO
A
8
DYMO® 6000 Labelmaker
NEW
UL/BOX
If not, press and hold down
then press
.
If shaded bands flash at the top and bottom of the display,
CASSETTE
press
until the flashing stops.
If the display is still not as shown above, see ‘Troubleshooting’,
page 34.
4. Use the keyboard to type in your full name – see Fig. 3.
Each character you enter will appear on the LCD display.
• Press and hold down
for UPPER CASE characters.
• Press the space bar once for the space between each name.
Del
If you make a mistake, press
in the correction.
to delete the error, then type
ITALIC
PREVIEW
SIZE
BARCODE
SYMBOL
ON/OFF
PRINT
STYLE
JUSTIFY
WIDTH
COLOUR
VERT
MC
NEW
UL/BOX
M
in
M
123...n
SEARCH
LENGTH
CASSETTE
COPIES
MR
ESC
CLEAR ALL
Del
9 (
1 !
2 "
3 '
4 - 5 % 6 /
8 *
0 ) + =
7 &
Q
W
E
R
T
Y
U
I
O
P
Å
PAGE
A
S
D
F
G
H
J
K
L
Æ
, .
^ ?
Ç
Ø
Z
X
C
V
B
N
M
¡
¿
:
Ñ
Fig. 3 — The keyboard
PRINT
5. When you have finished, press
. A label will be printed
and will emerge from the slot in the left-hand end of the
Labelmaker. Wait until the cutter mechanism has cut off the
label then remove it from the machine.
You should now have a high quality printed name label — don’t
waste it! If this is your personal machine, why not fix the label to the
underside to identify its owner? You have just found the first of
many uses for your DYMO Labelmaker labels.
Now read on....
DYMO® 6000 Labelmaker
9
Description of keys
The keyboard is divided into two distinct areas:
The keyboard
1.
The function keys —
ITALIC
PREVIEW
BARCODE
SYMBOL
ON/OFF
SIZE
STYLE
JUSTIFY
WIDTH
COLOUR
VERT
MC
NEW
"
PRINT
UL/BOX
M
in
M
SEARCH
123...n
LENGTH
CASSETTE
COPIES
MR
ON/OFF
Switches the power on and off. The Labelmaker will switch off
automatically if no keys are pressed after one minute.
The following keys have a dual function. The main function, as
printed on the key top, is performed by simply pressing the key.
For the secondary function, as printed above the key, press and
hold down
followed by the key required.
SIZE
Changes the character height. The height is normally adjusted
automatically as you key in the characters (see ‘Auto-scaling’). To
change the height manually, press this key repeatedly to step
through the character sizes available, as shown on the display.
PREVIEW
SIZE
+
+
Shows a view of the whole label on the display.
STYLE
A menu appears from which you can select normal (A), bold (A), or
outline (A) character styles, as indicated down the right hand side
of the display. The whole label will change to your chosen style.
ITALIC
STYLE
Changes the whole label into italic text (A), as indicated in the
bottom right hand corner of the display.
SYMBOL
Selects from a number of symbol characters. The selected symbol
is inserted into the label at the cursor position.
BARCODE
SYMBOL
+
+
A menu appears from which you can choose to convert the label
into a barcode label.
PRINT
Prints the label, then cuts the label at the end.
✂
PRINT
Feeds out approximately 30mm (11/∞") of label tape, then cuts the
tape.
10
DYMO® 6000 Labelmaker
UL/BOX
One press underlines the complete label.
A second press puts a line box around the complete label.
Pressing a third time gives underline and line box.
Press again to cancel and return to normal text.
NEW
UL/BOX
+
+
Clears the current label from the display and resets the Labelmaker
to normal settings — i.e. auto-scaling, normal text, normal width,
left-justified, all function options OFF.
WIDTH
Selects
double, reduced or normal width characters, as shown
on the display. Affects the whole label.
JUSTIFY
WIDTH
The complete label is normally left-justified (L), i.e. each line starts
at the left-hand side. Press to step through centred ( ) right justified
( ) or return to left justified.
M
in
Press to store a copy of the current label in the next available
memory space. The display will change to show ‘M’ for one second
to confirm — see ‘Memory’, page 15.
MC
MC
M
in
M
in
+
+
Press
+
to clear a stored label from the memory.
Can only be used after using ‘MR’ or ‘SEARCH’ functions.
COPIES
Displays a small box enabling you to use or to select the
number of multiple copies of a label. Press ESC to cancel.
123...n
COPIES
Enables a number label or barcode label to be incremented by 1 on
each of up to 100 copies of a label. Press ESC to cancel.
CASSETTE
Press to select the correct label format for the tape cassette
installed. If the label format/tape width are incompatible, there will
PRINT
be no response to the
key and the display will flash to show
the tape width installed; flashing stops when the correct label
format is selected. Note that the layout of the text on the label may
be altered.
LENGTH
CASSETTE
+
Displays the current label length. Press ESC to cancel or use
to increase or decrease the label length in 2mm (1/10") steps.
Label length can be fixed with the text justified to the left, centre or
or
right of the label ( displayed), or the text can be scaled to fit the
length of the label (|A| displayed) — see page 33.
VERT
Rotates the complete label through 90°, as indicated in the display.
Text is printed vertically. Press again to cancel.
COLOUR
VERT
+
Press to change the print colour of the label at the cursor position.
DYMO® 6000 Labelmaker
11
▲
MR
▲
Press to see all the labels stored in the memory; use
cursor keys to scroll through the labels. Use or
or
to move the
cursor along the text in each label. The cursor moves to the same
position in the text as you scroll through the labels.
SEARCH
MR
SEARCH
MR
+
Press
+
followed by up to six characters of the
label to be searched for. Enables you to search for particular types
of labels only, e.g. all labels beginning ‘DYMO 6’.
M
M
The
key
The
key enables you to mark and edit part of a label only.
For example, you can use it to change part of the text to a
different style or size.
Cursor keys
These keys move the text cursor around the text or, in
conjunction with certain function keys, select menu options and
numerical values.
▲
▲
▲
When editing text on a single-line label, pressing
cursor to the end of the label.
moves the
Pressing
the beginning or end of the line.
2. The main typewriter-style keyboard.
+
or
+
moves the cursor to
ESC
CLEAR ALL
Del
9 (
1 !
2 "
3 '
4 - 5 % 6 /
8 *
0 ) + =
7 &
Q
W
E
R
T
Y
U
I
O
P
Å
PAGE
A
S
D
F
G
H
J
K
L
Æ
, .
^ ?
Ç
Ø
Z
X
¡
C
V
B
N
M
¿
:
Ñ
The main ‘QWERTY’ keyboard follows the conventional typewriter-
style layout. Keys with single legends (e.g. ‘A’) function in the
normal way, with
characters.
+ A producing UPPER CASE
On dual legend keys (e.g. ‘2 "’ ), the left-most legend (‘2’) is created
as a lower case character. Press
+ ‘2 "’ for ‘ " ’.
Special function keys are as follows:
If you want all or part of your label in UPPER CASE, press
before you key the characters in (as indicated on the display by
‘CAPS’). Press again to cancel; subsequent characters are in
lower case. The setting of the
key is maintained if the
Labelmaker is turned off and on again.
12
DYMO® 6000 Labelmaker
PAGE
Press to create a new line of text on a label. The text height will be
scaled to fit the space available automatically.
Press
of the cursor point. For example:
The cat sat on the mat.
+ PAGE to create a new block of text, to the right
+ PAGE
NO ENTRY
will show on the display as:
The cat sat on
the mat.
NO ENTRY
A page break will also occur automatically if you enter more than
four lines of text, moving the extra text over to a new block to the
right of the existing text. Page breaks are shown on the display as
a vertical dotted line; these do not appear on the printed label.
Del
Press to delete the character to the left of the cursor.
Clear All
Del
+
+
Press to clear the complete label from the display. If the label has
already been stored in memory, it will be retained unchanged. All
function settings, e.g. width, justify, fixed length, etc. are retained.
ESC
or
Press ESC to escape from a selection menu or function which you
do not wish to complete.
1 !
ESC
1 !
International
characters
You can create international language characters by combining a
letter and a diacritical (accent). The diacriticals available on the
keyboard are ` ´ ^ ¨ ` and . To add a diacritical to a character,
~
enter the character first, followed immediately by the diacritical. For
example:
Press ‘E’ followed by ‘´’ to get é.
You can also add a diacritical to an existing character:
• Use
be changed
• Press the appropriate diacritical key.
or
to place the cursor to the right of the character to
DYMO® 6000 Labelmaker
13
Display and indicators
LCD display —
see Fig. 4.
The LCD includes a ‘WYSIWYG’ (What You See Is What You Get)
display. This feature enables you to see a representation of the
label you have created, before you print it.
The display also shows page break marks and indicator symbols to
confirm selections made using the function keys; these features
are not printed on the label.
Display window
T
• Justify: L = ranged left, = centred, = ranged right.
• Auto-scaling — see page 23.
Fig. 4 — LCD display
Tape widths
and display
formats
The display adjusts the label format according to the width of label
tape selected. For 19mm (34") tape, the display will be full height.
For 12mm (12") and 6mm (14") tapes, the display will be reduced by
bands of shaded areas at the top and bottom of the display area:
12mm (12") tape display
6mm (14") tape display
If the label tape installed is of a different width from the label format
displayed, the shaded areas of the display will flash on and off to
warn you. You can continue to edit the label, but there will be no
PRINT
response to the
key.
CASSETTE
CASSETTE
Pressing
enables you select the correct label format to
match the label tape width installed. Note, however, that the format
of your label may be altered when you select a different width.
14
DYMO® 6000 Labelmaker
Warning symbols The display includes a number of warning symbols which
appear to alert you. These are:
‘M’ Memory full — there is no more room in the memory to store a
label. Delete some labels to make room.
Cutter failure — there is a problem with the label tape cutter — see
‘Troubleshooting’, page 34.
No tape cassette installed — see page 28.
+
The internal batteries need re-charging — see page 6.
Memory
The Labelmaker is capable of storing approximately 6,000
characters in its memory, with the ability to store up to
approximately 4,000 characters on a single label.
When the Labelmaker is switched off (either manually, using
ON/OFF
, or automatically if no key has been pressed for one
minute), the label currently displayed will be retained in memory
and displayed when you switch on again.
M
in
Saving a label
to memory
• To save a copy of your current label to memory, press
the display will change to show m for one second to confirm.
If you then change the label, pressing
;
M
in
again will save a
separate copy of the latest version of the label to the memory, i.e.
both your original label and the changed version will be stored in
the memory.
Recalling a label
from memory
▲
MR
▲
• To recall a label from memory, press
and use
or
to scroll through the memory until the label required is displayed.
You can use or to move the cursor along the text in each
label. The cursor moves to the same position in the text as you
scroll through the labels.
MR
• Press ESC to cancel
• Press
and return to the normal display.
to place a copy of the selected label in the display at
the cursor position.
If there is a label already displayed, the copied label will be
added to the current label at the cursor position.
Note: The layout of the current label may be adjusted
automatically if:
• you insert a label from memory which was created for a
different width of label tape
• the label you are inserting has multiple lines of text, colour
changes or page breaks.
DYMO® 6000 Labelmaker
15
MC
in
Removing a
label from
memory
• Press
memory.
+
M
to remove the selected label from
Note: A label can only be deleted after the Memory or Search
function has been selected.
The search facility enables you to search through the memory for
labels of similar types, for example all the labels which include
‘DYMO 6000’. This facility is useful if you have many labels of
different types stored in the memory and will save time in finding
the label or labels required.
Search
SEARCH
MR
SEARCH
MR
+
Press
+
— the following appears on the display:
• Enter up to six characters of the label to be searched for, e.g.
‘DYMO 6’, then press
The Labelmaker will search for and group together all labels
.
▲
▲
which include ‘DYMO 6’. Use
labels for the label required.
or
to search through these
Note that the search function is not ‘case sensitive’ – any
combination of upper and lower case letters can be used to
search for any combination in a label – e.g. ‘dymo 6’ will find
‘DYMO 6’ or ‘Dymo 6’, etc.
• Press
to place a copy of the selected label in the display at
the cursor position. If there is a label already displayed, the
copied label will be added to the current label at the cursor
position.
SEARCH
MR
• Pressing
+
and then
(without entering any
▲
search characters) will cancel the search function. The
and
▲
keys will now scroll through the complete memory, as for the
MR
function.
• Press
+ MC to remove the selected label from memory.
Note: A label can only be deleted after the Memory or Search
function has been selected.
16
DYMO® 6000 Labelmaker
Symbols
SYMBOL
Pressing
changes the display to show a table containing
every character stored in the Labelmaker’s internal font memory.
The table includes many special characters and symbols which are
not available direct from the keyboard. By moving the cursor
around the table, you can select a character and then insert it into
your label, as follows:
• Use
or
to place the cursor at the point in your label you
wish to insert a symbol character, e.g:
Fax 284-1826
to display the character table:
SYMBOL
• Press
▲
■
'
/
!
)
" # $ % &
* +
▲
Use
,
,
or
to move the display
(
,
–
.
window around the table and to place the cursor
over the character required,
e.g. ‘☎’.
0 1 2 3 4 5 6
< = >
7 8 9
:
;
? @ A B C D E F
G H I J K L M N
O P Q R S T U V
• Press
; the display will revert to your label,
with the selected symbol character in position:
W X Y Z [
b c d e
\
]
a
i
Fax ☎ 284-1826
f
g h
j
r
k
s
l m n o p q
t u v w x y
SYMBOL
• Pressing
again will display the table with
the cursor on the same symbol, for repeat
insertions if required.
z ¢ £ ß ® © ™ Æ
Ø ± ¥ µ Ω æ ø ¿
¡ Œ œ ÷ X
● ★ ☎➞
1
SYMBOL
• Each further press of
will switch the
2
Fr ●
➞
display between the symbols table and your
label.
–
^
/
|
°
¨
˜
´
`
‚
å Å ä ë
ï
ö ü
• If the Labelmaker is turned off and on again, the
cursor will be positioned at the ¢ character, which
is the first symbol character in the table.
ÿ Ä Ë Ï Ö Ü ã ñ
õ Ã Ñ Õ á é
ú Á É Í Ó Ú à è
ò ù â ê ô û
í
ó
ì
î
ç Ç
DYMO® 6000 Labelmaker
17
|