iPad Charge & Sync Cart
Model MCC2
®
iPad Cart
430-MCC2-User Manual-00
iPad® Is a Registered Trademark of Apple Inc.
2. Tablet Cable Set-up For Charging and Syncing
Charging
The power cord needs to be plugged into the wall outlet.
Plug in and switch ON, the cart will then start the charging.
NOTE: the cart will not charge and sync at the same time.
1. Before installing the iPad charge cable
(USB to iPad connector) please make sure the power
cord is disconnected from the wall outlet. Unlock the
cart and open the doors.
2. Connect the USB cable connectors sequentially to
the power module ports that correspond to the
numbered slots.
LED indicator :
3. Repeat USB cabling steps for the rest of the USB
connector cables.
1 The indicator for each iPad is on the top of cart.They are sequencelly numbered LEDs
corresponding to each tablet in the slots.
LED Color Green = Charged.
LED Color Amber = Charging in progress.
Note:
4. Turn to the back of the cart, Wrap the excess
USB cable around the cable organizers.
LED indicators may have abnormal display if the USB cable is damaged or if a different version.
Connect the USB connectors in sequence to
the power module on the bottom of the cart.
5. Put tablets into the slots. Connect the USB
charging cables to the tablets/iPads.
4
5
4. Tablet Sync set-up
iTunes Setup
iPad Setup
Here are a few settings that should be changed in iTunes to make it work best with the cart
and iPads.
Before starting the syncing process, each individual iPad needs to be configured to work with
iTunes and the cart correctly. This can be done by plugging each device into the master syncing
laptop one unit at a time, or you can plug one unit in at a time within the cart. To speed up the
syncing process when syncing multiple devices, Apple suggests disabling automatic backups. This
can be accomplished using Apple Terminal or a third party software.
1.Open the iTunes application on your master laptop. Select Preferences from the Edit menu.
On the General pane, uncheck “Check for new software updates automatically”. This keeps
the automatic update process from interfering with the syncing process. You can still check
for iOS updates by manually clicking on the Check for Updates button on the individual
iPad screens. For more on iOS updates, see the iOS Update section below.
1.Setup your master laptop on top of the cart. Plug the laptop into the auxiliary outlet
and the USB cable into the auxiliary USB plug. Plug the cart power cord into a wall outlet.
2.Select one iPad. We recommend setting your screen brightness at half level or less as the
screen does stay on during much of the syncing process. Go to Settings and select
Brightness. Click Auto-Brightness so it turns to Off. Slide the brightness slide to the left so
it is positioned halfway between dim and bright.
3.Plug iPad into the cart.
NOTE: If connected to a PC, during this time drivers will be loading, so
wait until you get the message that your device is ready to use
before proceeding to step 4.
4.Open iTunes if it does not open automatically. Select your iPad
device from the Device table on the left side of the screen.
5.The iPad registration screen will come up. Follow the prompts to
log in or create an Apple ID and name your iPad.
2.Next, click on the Device icon. Make sure
none of the options are selected. The
screen should look like this when
complete. Click OK to save your changes.
6.Click on the Summary tab.
Select “Open iTunes when
this iPad is connected” and
“Sync only checked songs
and videos”. Verify “Manually
manage music and videos”
is not selected (this function
would require you to drag
and drop your selections to
each iPad).
3.Prepare your iTunes library by downloading
the Apps, Books, Music, etc that you intend
to copy to your iPads.
6
7
Safety
7..Click on each of the tabs at the top (Apps, Music, Movies, TV shows, Books, Photos) and
select which type of files you will want to sync on this device. Click the Sync or Apply button.
8..Repeat Steps 2 – 7 with each iPad that will be used in this cart.
WARNING :
This cart must only be used for its intended purpose in accordance with these
operating instructions. Failure to observe the following notices can result in fire, injury, death by
electric shock or equipment damage.
Ready to Sync
1..When all the iPad devices have been configured, you are ready to charge and sync your
tablets. Place each iPad in a slot in the cart. Plug each device in using the 30-pin Apple
connector connectors. Plug the cart into a wall outlet.
2..If the iPad devices are new, they should be fully charged before attempting to sync.
3..When ready to sync, connect one end of the USB cable into the USB port near the auxiliary
outlet and the other into a USB 2.0 port on your Mac or PC.
．Always turn the cart power OFF before plugging the power cord into
or removing from the wall outlet.
．Make sure each devices is turned OFF before plugging into the cart.
．Do not unplug this cart from the outlet when your hands are wet.
．Do not use cables that are damaged.
．Do not unplug by pulling on the cable.
．Do not plug the power cord into an extension cable.
．Keep the door closed and locked when in use.
4. .iTunes will open and syncing will start automatically. Each iPad will be listed in iTunes
under the Device list on the left hand side of the screen. You could review the sync status
from master PC.
NOTE: Please keep in mind that identifying the devices and syncing will take time, so please
be patient. The time is dependent on the number of iPads being synced and the
amount of data being transferred. It can range from a few minutes to hours on 32
devices depends on different content. Please do not stop the process once it has been
started.
ELECTRIC SHOCK
Operate Carefully
．Disconnect the power cord from the wall outlet before opening the doors.
．Before moving this cart from one room to the next, wrap the power
cord around the winder located on the rear side of the cart.
5..When syncing is complete, the Eject symbol will appear next to each device. At this time it
is safe to eject the device by clicking on the Eject symbol or closing iTunes.
6..When syncing is complete, unplug the USB Cable from your PC so charging can begin.
Charging will not occur while the USB Cable is plugged into the master laptop.
iOS Updates
．This cart is not designed to be operated by a child or student. Only
Adult operation and supervision should move this cart.
．Do not allow anyone to set, stand, or climb on the cart.
．Move the cart slowly.
．Keep the caster locked when the cart is not in transit.
．Keep the cart away from water.
．Keep the ventilation holes unblocked for air circulation.
．Do not block the ventilation holes when charging.
．Do not pull the cart. Push the cart using the ergonomic handles
to prevent muscle strain.
．Do not place a TV or monitor on top of the cart.
．Do not use the cart to store liquids or cleaning supplies.
．Keep the door closed and locked when in use.
．Disconnect the power cord from the wall before opening doors.
Due to the functionality of the iTunes
software, iOS updates can not be done
across the whole fleet of iPads at one
time. This will need to be completed
one unit at a time. It can still be done
with the units plugged into the cart.
To update iOS on each iPad, select an
iPad from under the Device list on the
left side of the screen. Click on the
Update button in the middle of the
screen. Follow the prompts to
complete the update. Updating time
will vary depending on the size of the
update from Apple. When one unit is
complete, the next unit can be
selected until all units have been
updated.
8
9
DUKANE CORPORATION
ONE-YEAR LIMITED WARRANTY
This Dukane product is warranted to the original purchaser for a period of one (1) year
from the original purchase date – in normal operating conditions – against defects in
material and workmanship. DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL
OTHER WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
DURING THE WARRANTY PERIOD, DUKANE CORPORATION’S LIABILITY FOR ANY
DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF
PRODUCT AT DUKANE CORPORATION’S OPTION. REPLACEMENT PRODUCTS
MAY BE NEW OR USED. The following are not covered by the limited warranty and
Dukane Corporation shall not be liable for:
1. Any product which is not distributed in the U.S.A. or Canada by Dukane
Corporation or an authorized dealer.
2. Damage, deterioration or malfunction resulting from:
• Mispackaging, accident, misuse, abuse, neglect, improper ventilation, fire,
dust, smoke, water, lightning or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
• Repair or attempted repair by anyone other than a Dukane Corporation
authorized service center.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487
Fax 630-584-5156
• Any shipment of product (claims must be presented to the carrier).
• Removal or installation of the product.
• Any other causes which do not relate to a product defect.
3. Cartons, carry cases, shipping cases, batteries, or any accessories used in
connection with the product.
4. Service required as a result of third party components.
5. Product used as commercial rental units
Toll-free Support During Business Hours
800-676-2487
Emergency Technical Support After hours
800-265-6176 or 800-676-2485
Dukane corporation will pay labor and material expenses for covered items, but
Dukane Corporation will not pay for the following:
1. Cost of technical adjustment, set-up, maintenance, or adjustment of user
controls.
2. Payment of shipping and related charges incurred in returning the product for
warranty repair.
Dukane Corporation disclaims all liability for incidental or consequential damage of
any kind, including all damages arising out of any interruptions in operation of the
product and all damages to software.
No person, firm, or representative is authorized to assume any obligation or to make
any warranty on behalf of the Dukane Corporation other than as stated above.
403-MCC2 User Manual-00
|