Curtis Flat Panel Television LCD1105A User Manual

LCD1105A  
Operation Instruction  
LCD Color digital TV receiver  
NOTE: THIS UNIT IS NOT MEANT TO BE USED IN A MOVING VEHICLE.  
ATSC DIGITAL TUNERS DOES NOT RECEIVE SIGNAL WHEN IN MOTION.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
 
I Precautions  
Storage  
1. Keep this product away from extremely hot or cold places. The  
storage temperature ranges from -40 to 60 and the working  
temperature from -5 to 40 .  
2. Do not use this product at damp environment like bathtubs, wash  
basins, kitchens, washtubs, as well as basements, swimming pools  
or similar places.  
3. Do not expose your TV set to high humidity, dust or oil smoke.  
4. Do not throw or drop this product.  
5. Do not subject this device to the inside of a case or strong vibrations,  
avoiding strong collision.  
6. Do not push on or scrub this product with sharp objects.  
Maintenance  
1. Disconnect all cables of this device at first before cleaning.  
2. Wipe the enclosure, screen and keys using soft cloth with a little  
soft detergent on.  
3. Do not use polishing cloth, abstergent, and all types of propellants or  
chemical detergents like alcohol and benzene to clean your device.  
Warning!  
1. Do not watch television programs or turn your TV set on for your  
own and others' safety.  
2. It is very dangerous to watch television programs or operate the  
TV set while driving.  
Special Notice  
Bright spots or dark spots may appear on the screen. This is a  
normal phenomenon associated with the active matrix display  
technology and is not a sign of malfunction. Do not attempt to  
maintain. For any failures, please turn off your TV set immediately  
and contact us or your dealer. This device integrates a great deal  
of fine electronic components. Disassembly or alternation may  
result in damages or breaks.  
 
-1-  
II Accessories  
1. Car adapter  
2. AC adapter  
3. AV conversion cable  
4. Remote control  
5. AAA type batteries  
6. Telescopic antenna  
7. 75 ohm antenna conversion cable(screw connector)  
8. User manual  
* Open the package and make sure all the items are included.  
 
-2-  
III Appearance  
1. Loudspeaker  
2. TFT-LCD Screen  
3. Control Panel  
4. Remote-control receive  
window  
6. Power: power on/off  
7. Antenna Input Jack  
8. AV2 IN Input  
9. AV1 IN Input  
10. Earphone Jack  
11. 12V DC Power Jack  
5. Power indicator  
Red: Standby  
Green: Power-on  
 
-3-  
IV Description of Panel Buttons  
1. MENU: Menu button, press to show  
the main menu. When system enters  
a multilevel submenu, press to return  
the previous menu step by step.  
2. CH+ : Upward selection/Channel  
increasing.  
3. CH- : Downward selection/Channel  
decreasing.  
4. VOL+ : Rightward selection/For volume increasing.  
5. VOL- : Leftward selection/For volume decreasing.  
6. SOURCE: TV,AV1,AV2 switch.  
7. MTS: Language switch button, press to adjust among different  
languages.  
8. AUDIO: Audio mode button, press to choose among the four audio  
modes, Standard, Music, Movie, Personal.  
9. EPG: press to show the program guide menu. ( ATSC mode )  
10. PRLIST: TV program menu key, press to see the entire program  
list in a program list box.  
11. CC: Close/Open caption.  
12. INFO: Press to show the information of present program.  
 
-4-  
V Remote Controller Operation Instruction  
1
9
2
3
4
10  
11  
12  
13  
14  
15  
5
6
7
8
16  
17  
18  
1. CH+/CH- (Program choosing key, up and down direction key):  
Press CH+ key to increase the channel by degree. Press this key  
and choose menu upward if it is in the system menu.  
Press CH- key to decrease the channel by degree. Press this key  
and choose menu downward if it is in the system menu.  
2. VOL+/VOL- (Volume control key, left and right direction key)  
Press VOL+ to turn up the volume. Press this key to choose menu  
rightward if it is in the system menu.  
Press VOL- to turn down the volume. Press this key to choose  
menu leftward if it is in the system menu.  
3. TV/AV Switch Key: When pressing this key, you switch state among  
TV, AV1 and AV2.  
4. MUTE (Mute Key): When you press this key, the sound will  
disappear, and press again or press VOL+ the sound will return  
to normal.  
5. 0, 1, 2, 3, ... 9: Program Direct Choosing Key. Press this key to  
choose program number.  
6. : Press this key to execute channel direct choosing transform  
function.  
7. CC: Close/Open Caption  
8. MTS: When pressing this key, you can adjust among different  
languages.  
 
-5-  
9. MENU: Menu key. When you press this key, the main menu will  
display. When the system enters a multilevel submenu, press this  
key and return to previous menu step by step.  
10. PRLIST: TV program menu key. When pressing this key, you will  
see the entire program list in a program list box.  
11. POWER (Power Switching Key): When you press this key, the  
TV set will be turned off, and press again it will be turned on.  
12. EXIT: Exit Key. Press this key, exit operation and return to the  
program.  
13. PICT: Image Mode Key. Press this key to choose among the four  
image modes of Standard, Dynamic, Soft and Personal.  
14. AUDIO: Audio Mode Key. Press this key to choose among the four  
audio modes of Standard, Music, Movie, Personal.  
15. INFO: When you press this key, the system will show the message  
of present program.  
16. EPG: When you press this key, the system will show the program  
guide menu(ATSC mode).  
17.  
: Return Key. Press this key to return to last program you were  
watching and press again to return to current program.  
18. FORMAT: When pressing this key, you can choose among Normal  
and Wide image display formats.  
 
-6-  
VI Basic Operation  
1. Connection of Power Supply:  
Align the power supply plug on  
AC adapter with the jack on the  
machine rear cover marked with  
DC.  
2. Connection Of External Antenna:  
75 external antenna cord  
Align one end of the attached  
external antenna cord plug with  
the external antenna jack, and  
the other end to connect the  
external antenna head.  
3. Connection of AV convert Cable:  
AV transforming wire  
Insert the external video cord into  
the yellow port of the AV convert  
cable, the left sound track into the  
white port and the right sound track  
into the red port. Then plug the AV  
convert cord in AV1 IN or AV2 IN  
jack.  
 
-7-  
VII TV Menu Operation  
7.1. TV/AV Image Quality Adjustment  
Personal  
Picture Mode  
Contrast  
Brightness  
Color  
50  
50  
50  
50  
0
Sharpness  
Tint  
UP/DOWN  
ADJUST "MENU": EXIT  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to adjust the numerical value or setup  
the contents, then press Menu to confirm and return to previous list.  
Press Menu again or press EXIT key on the remote controller to quit  
the sub menu list directly after the adjustment of image quality.  
Precautions  
1. There are four options of picture mode, which are Personal,  
Standard, Dynamic and Soft.  
2. Contrast: Adjust the black and white contrast of the image  
3. Brightness: Adjust the brightness of the image  
4. Color: Adjust the color of the image  
5. Sharpness: Adjust the sharpness of the image  
6. Tint: Adjust the red and green balance of the image  
 
-8-  
7.2. Sound Adjustment  
Standard  
English  
Sound Mode  
Bass  
50  
50  
50  
Treble  
Balance  
Audio Language  
UP/DOWN  
ADJUST "MENU": EXIT  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to adjust the numerical value or setup  
the contents, then press Menu to confirm and return to previous list.  
Press Menu again or press EXIT key on the remote controller to quit  
the sub menu list directly after the adjustment of sound effect.  
Precautions  
1. There are four options of sound mode, which are Personal,  
Standard, Movie and Music.  
2. Bass: Adjust bourdon.  
3. Treble: Adjust alt.  
4. Balance adjust the balance between left and right sound track.  
5. Audio Language can be setup as English, French and Spanish.  
7.3. Time Adjustment  
Time Zone  
Day Saving Time  
Clock  
Eastern  
Off  
2004/12/31 16:00  
UP/DOWN  
ADJUST "MENU": EXIT  
 
-9-  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to adjust the numerical value or setup  
the contents, then press Menu to confirm and return to previous list.  
Press Menu again or press EXIT key on the remote controller to quit  
the sub menu list directly after the adjustment of time.  
Precautions  
1. Time Zone has seven areas to be chosen.  
2. Day Saving Time can be setup as Off or On (Summer time off or on).  
3. Clock 2004/12/31 16:00 shows the current program time.  
7.4. Settings  
Language  
English  
Off  
Transparency  
Color Mode  
zoom mode  
Normal  
Auto  
Closed Caption  
Restore Default  
UP/DOWN  
ADJUST "MENU": EXIT  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to setup the contents.  
7.4.1. OSD Language Settings  
Press Up and Down Key to choose Language, and press Left and  
Right Key to choose among English, French and Spanish.  
7.4.2. Menu State Settings  
Press UP and Down Key to choose Transparency, and press Left and  
Right Key to choose Off (menu transparency off) or On (menu  
transparency on).  
7.4.3. Color Auto-adjustment  
Press Up and Down Key to choose Color Mode. Press Left and Right  
Key to choose among Normal, Warm and Cool.  
7.4.4. Zoom Mode Settings  
Press UP and Down Key to choose Zoom Mode, and press Left and  
Right Key to choose among WIDE, NORMAL.  
 
-10-  
7.4.5. Closed Caption Settings  
Many TV programs contain closed caption information, and the  
audience can see the caption in words on the screen. Not all the  
channels at any time have closed caption code information.  
Press Up and Down Key to choose Closed Caption and press Left and  
Right Key to enter the following picture.  
Off  
CC1  
CC Mode  
Basic Selection  
Advance Selection  
Option  
Service1  
On  
UP/DOWN  
ADJUST "MENU": EXIT  
There are three CC Modes, which are Off (closed caption off), On  
(closed caption always on when information is available) and CC on  
Mute (closed caption on when TV is in mute and closed caption off  
when TV is not in mute).  
Basic Selection can choose among CC1, CC2, CC3, CC4, Text1,  
Text2, Text3 and Text4  
Advance Selection can choose among Service1, Service2, Service3,  
Service4, Service5 and Service6.  
Option: Press Up and Down key to choose option item to set the  
display mode of CC.  
7.4.6. Restore Settings  
Press UP and DOWN key to choose Restore Default, press VOL+ Key,  
the hint of Are you sure will show. As in the following picture, press  
YES or NO to choose whether restore or not and press CH+ or CH- to  
confirm.  
Are you sure?  
NO  
YES  
UP/DOWN  
SELECT  
 
-11-  
7.5. Program Searching  
Press MENU Key to enter the menu list, press Left and Right Key to  
enter the following list, press Up and Down Key to enter the sub-list  
and then press Left and Right Key to setup the contents.  
7.5.1.1. Antenna can be setup as CATV and Air.  
Antenna  
CATV  
Auto Scan  
Favorite  
Show/Hide  
Channel No.  
Channel Lable  
DTV Signal  
UP/DOWN  
ADJUST "MENU": EXIT  
Antenna  
Air  
Auto Scan  
Favorite  
Show/Hide  
Channel No.  
Channel Lable  
DTV Signal  
UP/DOWN  
4-1  
ADJUST "MENU": EXIT  
7.5.1.2. In the CATV state, chooseAuto scan and press OK to enter  
Cable system settings. Four options, AUTO, STD, IRC, HRC can be  
chosen.  
Cable System  
Start to Scan  
AUTO  
DTV Signal  
UP/DOWN  
ADJUST "MENU": EXIT  
 
-12-  
7.5.2. In the Start to scan item, press VOL+ to start searching.  
Auto searching will clear the primary program.  
AUTO  
Cable System  
Start to Scan  
DTV Signal  
UP/DOWN  
ADJUST "MENU": EXIT  
After received the programs,the DTV Signal item will show the DTV  
signal strength.  
7.5.3. Choose Favorite item, press Up and Down key to choose  
program, press Left and Right key to setup favorite program.  
Antenna  
Auto Scan  
CATV  
Favorite  
Show/Hide  
Channel No.  
Channel Lable  
DTV Signal  
UP/DOWN  
ADJUST "MENU": EXIT  
7.5.4. Show/Hide settings  
Choose Show/Hide and press Up and Down key to choose program  
then press Left and Right dey to setup Show or Hide the program  
Antenna  
Auto Scan  
Favorite  
CATV  
Show/Hide  
Channel No.  
Channel Lable  
DTV Signal  
UP/DOWN  
ADJUST "MENU": EXIT  
 
-13-  
No.  
4-1  
Program Name  
FD 3803  
Show  
9-2  
KQED-SD  
SELECT  
"MENU": EXIT  
7.5.5. Change Channel Number  
Choose Channel No. as in the following picture:  
Antenna  
Air  
Auto Scan  
Favorite  
Show/Hide  
Channel No.  
4-1  
Channel Lable  
DTV Signal  
FD 3803  
UP/DOWN  
ADJUST "MENU": EXIT  
Press VOL+ or VOL- to change current channel number.  
7.5.6. Change or Edit Program Name  
Choose Channel Label and press VOL+ to enter the following picture.  
Press UP and Down key to alter the characters and numbers in the  
box to change the program name according to your preference as in  
the following picture.  
F
D
3
8
0
3
UP/DOWN  
ADJUST "MENU": EXIT  
 
-14-  
VIII To Receive Clear Image  
Adjust the length, angle and direction of the telescopic antenna to  
receive the optimal image. Draw back the antenna beginning from the  
wide part after using.  
Warning  
If the signals are too weak, no matter how to adjust the antenna, the  
image will not be clear and there are phenomenons like high noise,  
shaking, and sound not well and so on. It's not the fault of the TV  
set. If the image quality is not good when using the telescopic  
antenna, try to use open antenna or cable TV.  
 
-15-  
IX Before Repair  
The following phenomenons do not mean that the TV set has fault.  
Please check it according to the following methods before repair.  
Phenomenon  
Reason  
AC adapter or automobile adapter  
connecting improperly; using  
unauthorized power; the power switch is  
on the state of off.  
No image and sound  
Whether chosen the right channel; auto  
setup receiving channel again; channels  
need to be reset in a new place.  
No signal  
No sound  
Whether the volume has been turned  
down at the bottom; whether the  
earphone is inserted; signals too weak;  
the mute function is working.  
Whether the antenna has been adjusted  
properly, and maybe the signals are too  
weak.  
Mosaic in the image  
Could not receive signals  
Image too dark  
Maybe the local signals are too weak;  
open antenna or cable TV preferred.  
Whether the brightness and contrast are  
proper, and please adjust again.  
When the car is moving,  
if there are mosaics in  
the image or the image  
and sound are not fluent.  
It is possibly because that the local  
signals are too weak. Please move to  
place with strong signals to receive.  
 
-16-  
X Technical Parameter  
Input  
ATSC frequency: 54MHz 803MHz  
NTSC receiving frequency: 55.25MHz 801.25MHz  
LCD Screen Technical Parameter  
LCD screen: 11 inch  
LCD screen scale: 16:9  
Resolution: 800(H)  
RGB  
480(V)  
Response Rate: R: 30/F: 50  
Visible Angle: U: 55/D: 65 L/R: 65  
Illuminant: CCFL  
Lamp Life: >10,000 Hours  
Capability Parameter  
Power Supply: AC INPUT 100-240V 50/60HZ  
DC OUTPUT 12V/2A  
Dimensions: 367  
Net Weight: About 1500g  
Power Consumption: About 19W  
205  
63.5mm  
 
-17-  
XI Stand Assemble Instruction Manual  
Pict.-1  
Pict.-2  
Pict.-3  
Pict.-4  
Pict.-5  
Pict.-6  
Pict.-7  
Pict.-8  
Pict.-11  
Pict.-12  
Pict.-9  
Pict.-10  
Pict.-13  
Pict.-14  
Pict.-15  
Step one: Pick up the stand accessory from the package as Pict.-1.  
Step two: Take out the rectangle patch from the stand haead as Pict.-2,  
Pict.-3 & Pict.-4.  
Step three: Loose the screw of rectangle patch, and then locked it on the  
back of the Unit. as Pict.-5 & Pict.-6.  
Step four: Loose the screw and open the stand head as Pict.-7 & Pict.-8.  
Step five: Lock the 2 piece stand hand while they combine together with  
stand in middle as Pict. -9 & Pict.-10.  
Step six: Firm the screw while adapting the angle as Pict. -11 & Pict.-12.  
Step seven: Lock the stand into the unit as Pict. -13 & Pict.-14.  
Step eight: Completed As Pict.-15.  
 
-18-  
Warning  
This operation instruction is only intended for reference. No further  
notice is available to any modification of all information contained  
therein. Due to continuing improvements, the features and design  
are subject to change without notice.  
Warning  
There is no component that can be repaired in the TV set. Do not try  
to disassemble and improve the TV set. There is high voltage inside  
and it is very dangerous. The maintenance and adjustment work  
should be carried through by professional people.  
Warning  
To prevent injury, this apparatus must be securely attached to the  
floor/wall in accordance with the installation instructions.  
The mains plug is used as the disconnect device, the disconnect  
device shall remain readily operable, and it shall be disconnected  
from the mains completely.  
The plug is used as disconnect device form the mains supply, the  
plug shall remain readily operable.  
The apparatus should not be exposed to dripping or splashing and  
that no objects filled with liquids, such as vases, shall be placed on  
the apparatus.  
No naked flame sources, such as lighted candles, should be  
placed on the apparatus.  
 
-19-  

Craftsman Lawn Mower 9172565 User Manual
Craftsman Portable Generator 919670070 User Manual
Curtis Refrigerator FR171 User Manual
Dukane Projector 8784 User Manual
Dynex Computer Drive DX PHD25 User Manual
Electro Voice Speaker System FRX+640 User Manual
Fender Musical Instrument Amplifier Stage 1000 User Manual
Fisher Paykel Ventilation Hood OB60N8DTX User Manual
Fusion Flat Panel Television TV M160DVD User Manual
GE Double Oven JBP89SM User Manual