Cuisinart Water System IB 8895A User Manual

INSTRUCTION  
BOOKLET  
®
Cuisinart®  
WCH-1000  
Countertop Filtration System  
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.  
 
8. Spigot  
9. Base  
CONTENTS  
Important Safeguards. . . . . . . . . . . . . 2  
Special Cord Set Instructions . . . . . . 2  
Introduction . . . . . . . . . . . . . . . . . . . . 3  
Parts and Features. . . . . . . . . . . . . . . 3  
Unpacking and Placement. . . . . . . . . 4  
Water Filter Setup . . . . . . . . . . . . . . . 4  
Water Dispenser Setup . . . . . . . . . .4-5  
Operating Instructions . . . . . . . . . . . . 5  
Replacing Water Filter . . . . . . . . . . . . 5  
Tips and Hints . . . . . . . . . . . . . . . . . . 5  
Cleaning and Care . . . . . . . . . . . . . . . 5  
Troubleshooting . . . . . . . . . . . . . . . . . 6  
Storing the Unit . . . . . . . . . . . . . . . . . 7  
Technical Specifications . . . . . . . . . . 7  
Performance Data Sheet . . . . . . . . . . 8  
California Certification . . . . . . . . . . . . 9  
For Purchases Made in Iowa . . . . . . 9  
Warranty . . . . . . . . . . . . . . . . . . . . . . 10  
10. Internal Water Tank (not shown)  
Cold tank – approx. ¼ gallon capacity.  
11. Drainage Plug (not shown)  
One removable plastic plug is located  
on bottom of unit.  
12. Replacement Water Filter  
(Model GF-80)  
The Cuisinart® water filter has an  
optimum filter life of 3 months.  
1
2
INTRODUCTION  
3
4
Pour yourself a glass of fresher, cleaner,  
filtered water for a refreshing drink without  
opening the refrigerator or a bottle.  
Your  
Countertop Filtration  
System is Cuisinart at its most convenient.  
Drink healthy!  
5
6
7
PARTS AND FEATURES  
8
1. 12-Week Filter Timer  
Lets you know when to change your  
water filter.  
9
2. Cover  
Flip-top lid for easy filling.  
3. Upper Water Tank  
(Holds approx. ½ gallon of unfiltered  
water)  
10  
4. Lower Water Tank  
(Holds approx. ¾ gallon of filtered water)  
11  
12  
5. Cold Water Button  
Press to dispense chilled water.  
6. Temperature Indicator Light  
Blue LED lights up when water has  
reached cold temperature.  
7. Room Water Button  
Press to dispense room temperature  
water.  
 
2. Remove the filter timer from the lid by flipping  
the lid over and pressing on the plastic tab.  
UNPACKING & PLACEMENT  
®
1. Remove your Cuisinart®  
3. Wash both tanks and plastic lid in mild, soapy  
water, and rinse. Replace the filter timer.  
Countertop Filtration System carefully from  
the box.  
4. Lift the filter from the bowl and allow water to  
drain.  
2. Position the unit on a stable flat surface, close  
to a main power outlet. Avoid direct sunlight  
and keep out of the reach of children.  
NOTE: The filter's loose  
carbon dust may slightly  
darken water while soaking.  
3. Allow at least 3 inches of space around  
the sides and rear of the unit for proper air  
circulation.  
5. With the Cuisinart® logo  
facing up, insert the water  
filter into the upper water  
tank and push firmly into  
place.  
4. Remove filter from upper tank and carefully  
follow the SETUP instructions below. You will  
need a large bowl, a pitcher (or another type  
of container) and a glass.  
NOTE: Do not plug in unit until ALL steps of  
SETUP are complete.  
6. Place the upper tank on a  
pitcher (or another type of  
container) and fill with cold  
tap water. Allow to drain for  
5 minutes to flush out any  
remaining carbon dust, then  
pour out remaining water.  
WATER FILTER SETUP  
NOTE: For optimum filtering and flow rates,  
the water filter must be prepared and installed  
exactly as follows:  
Preparing the Water Filter  
WATER DISPENSER SETUP  
NOTE: Use only cold tap water to fill the unit.  
Filling the Upper and Lower Tanks  
1. Remove the filter from its packaging.  
NOTE: The filter may contain a small amount  
of loose carbon dust. It may also appear moist,  
have a faint smell of plastic or a slight yellowish  
tint – these are all normal. DO NOT wash filter  
with soap or water.  
1. Place the upper tank onto the lower tank and  
cover with the lid.  
Lid  
2. Place water filter in  
empty bowl sideways  
(see image). Pressing it  
Upper  
water tank  
firmly to the bottom of the  
bowl, and being careful  
not to pour water directly  
Lower  
water tank  
onto the filter. Slowly add  
enough cold water to fully submerge and  
cover the filter by at least 1 inch. (You  
should see bubbles escaping the filter.)  
2. Place assembled tanks on base. NOTE: The  
vertical groove on the upper tank must face  
the back of the unit.  
3. Continue to hold filter under water for at least  
30 seconds.  
4. Release the filter and let it  
soak at least 15 minutes.  
NOTE: While soaking, the  
filter should be partially  
3. Carefully lift the flip top lid and add cold  
water to the FILL line. NOTE: This is a gravity  
fill system. To increase the filtering flow rate,  
continue adding water to the FILL line of the  
upper tank until tanks are completely full.  
submerged and may tilt to one side.  
Installing the Prepared Water Filter  
4. During the initial setup, allow 20–30 minutes  
for water to filter into and completely fill upper  
and lower tanks.  
1. While the filter is soaking, remove the lid,  
upper water tank and lower water tank.  
 
Filling the Internal Tank  
3. Press and hold each button to ensure all air  
has been purged from the unit so water flow  
is steady.  
NOTE: Upper and  
lower tanks must be  
completely full before  
proceeding.  
Upper  
Tank  
REPLACING WATER FILTER  
Replacement filters may be purchased at most  
your filter, follow “Water Filter Setup” on page 4.  
Lower  
Tank  
1. Place a glass under  
the spigot and press  
and continue to hold  
the COLD button until  
water flow becomes  
steady (may take up to  
3 minutes).  
TIPS AND HINTS  
• Drinking 4 to 8 glasses of water each day is  
healthy! Your countertop chiller makes it easy.  
• Regular use of cleaner, filtered water in your  
automatic coffeemaker means less frequent  
decalcification treatments.  
• Use filtered water in your iron to reduce  
mineral build-up.  
• Treat your pets to cleaner, filtered water.  
• Cleaner, filtered water makes tea and instant  
soup or coffee taste better.  
2. Repeat process with ROOM button until both  
flow steadily.  
NOTE: When filling the cold internal tank, the  
water level in the lower tank will drop and you  
will hear the filling process taking place.  
Setting the Filter Timer  
The filter timer, located on the lid of the unit, lets  
you know when to change your water filter. Each  
filter will last for 3 months.  
• Keeping the upper tank full helps increase the  
filtering process as well as the flow rate of water  
from spigots.  
• Proper setup of the filter (as instructed  
on page 4) will maximize the reduction of  
contaminants and optimize taste of water.  
1. Once unit is set up and all water tanks are full,  
peel off the FILTERINg sticker from the filter  
timer screen.  
• Conserve energy by unplugging your unit  
when only room temperature filtered water  
is needed.  
You may notice some condensation and water  
droplets on the lid and tanks of your unit. This  
is normal due to the cooling system.  
2. Press and hold the Start button until  
FILTERINg is displayed (approx. 3 seconds).  
3. In 12 weeks, the word REPLACE will appear.  
For best results, we recommend inserting a  
new Cuisinart® Water Filter immediately.  
4. You may turn off the timer and display by  
pressing the Start button for 5 seconds.  
Once you replace the filter, reset the timer  
by pressing the Start button for 3 seconds.  
NOTE: You may reset the timer at any time  
by pressing and holding the Start button for  
3 seconds.  
CLEANING AND CARE  
CAUTION: To prevent personal injury or  
electric shock, always unplug your Cuisinart®  
® Countertop Filtration System from  
outlet before cleaning. Do not immerse base in  
water or other liquid.  
1. Unplug the unit from outlet.  
2. Remove the filter and place it in a bowl.  
3. Lift upper water tank and let it drain into  
lower tank, and set it aside. Then lift lower  
tank off base and empty. Careful, a full tank  
can be very heavy!  
OPERATING INSTRUCTIONS  
Once setup is complete, tanks are filled and  
water is flowing steadily, your unit is ready to use!  
1. Close the lid and plug unit into outlet to  
activate the cooling function.  
2. After about 1 hour and 20 minutes, the BLUE  
cold water indicator will light up, signaling  
water is chilled.  
4. Clean the water tanks and the cover with  
warm soapy water. NOTE: Remove filter  
timer before washing lid. Filter timer is not  
immersible.  
5. The base is not immersible. Simply wipe it  
clean with a damp cloth.  
NOTE: On subsequent fill-ups, unit should take  
less than 30 minutes to chill.  
6. Dry thoroughly when clean.  
 
TROUBLESHOOTING  
Symptom  
Possible Cause  
Solution  
It takes longer than  
45 minutes for  
the water to pass  
through the filter.  
Place filter in an empty bowl, then fill with  
water, making sure it is fully submerged.  
Resoak it for 10–15 minutes, or until no  
more bubbles are observed.  
Some air is still in the filter.  
Review “Filling the Internal Tank” on page 5 to  
be sure it was done correctly. Make sure the  
lower water tank is full. Continue to press and  
hold push buttons until water flow is steady. If  
unit still won’t dispense water or flow does not  
become steady, contact Customer Service.  
Unit does not  
dispense water  
when buttons are  
pushed.  
Internal water tank is not  
completely filled with water.  
Water continues  
flowing from spigot  
after push button is  
released.  
Remove water tanks from the base.  
Continue pressing button until it no longer  
sticks.  
Push button is stuck.  
1. Make sure unit is plugged into outlet  
and is not controlled by a wall switch.  
2. Make sure air has been purged from  
internal tank, as stated on page 5.  
3. If there is water in the tank, it will take  
about 80 minutes for the water to chill  
the first time. It takes only about 30  
minutes for subsequent fill-ups.  
1. Unit might not be  
plugged into outlet  
2. There is no water in  
tanks.  
COLD water LED  
does not light up.  
Filter Timer does  
not show “Filtering” Battery is dead.  
or “Replace.”  
Contact Customer Service for replacement  
filter timer.  
1. Water tanks are not  
1. Make sure water tanks are seated  
properly on the base.  
2. Ensure that drainage plug is correctly  
installed on the bottom of the base.  
Leakage on the  
countertop.  
properly seated on base.  
2. Drainage plug is not fully  
engaged.  
Water leaks from  
the top cover.  
Drain excess water from tanks by pressing  
push buttons.  
Water tanks are overfilled.  
ROOM temperature  
water is warm.  
ROOM temperature water must be used  
on a regular basis.  
 
Bottom of unit  
STORING THE UNIT  
1. Unplug the unit from outlet.  
2. Remove empty water tanks, filter and cover.  
3. Bring base to sink.  
Drainage  
Plug  
4. Drain internal reservoir by tilting unit slightly and removing  
the plastic drainage plug from bottom of unit. Plug is tightly  
inserted and must be gently, but firmly, worked to remove.  
5. When water has completely drained, replace plug, tanks,  
filter and cover.  
6. Your Cuisinart  
Countertop Filtration System is ready to store.  
TECHNICAL SPECIFICATIONS  
Unit: WCH-1000  
1 Cuisinart®  
® Countertop  
Filtration System  
1 Cuisinart® Water Filter  
System Capacity  
up to 3 months/ 48 gallons/ 181 liters  
104°F (40°C)  
Maximum Input Temperature  
Minimum Input Temperature  
Maximum Output Temperature  
Minimum Output Temperature  
Rated Service Flow  
34°F (1°C)  
104°F (40°C)  
44°F (7°C)  
6 gallons / 22.7 liters per day  
(may vary according to water conditions)  
Electrical Requirements  
AC~120V 60Hz 1A 75W  
System Tested and Certified by WQA against NSF/ANSI Standard 53 for  
the reduction of Lead, Benzene, Cadmium, Copper, Mercury,  
Tetrachloroethylene, Toluene, and Standard 42 for the reduction of  
Chlorine Taste and Odor.  
See Performance Data Sheet for specific test conditions and results.  
Claims are calculated based on WQA accepted practice of average percent reduction. The  
contaminants or other substances removed or reduced by this water treatment device are  
not necessarily in all users’ water. Do not use with water that is microbiologically unsafe or of  
unknown quality without adequate disinfection before or after the system. Individuals  
requiring water of specific microbiological purity should consult their physician.  
The Cuisinart®  
Countertop Filtration System processes approximately 48  
gallons/181 liters. When the Cuisinart® Water Filter (gF-80) exceeds filtering capacity,  
replacement is essential for the product to perform as represented. In the United States,  
replacement filters cost generally $19.99 per filter. Replacement filters may be purchased at  
most retail outlets. The performance of the filter may vary based on local water conditions.  
Hot water should not be used with the Cuisinart® Water Filter (gF-80) as it will affect the  
filter’s performance.  
Refer to the Operating Instructions and Cleaning and Care for general unit operation and  
maintenance requirements. Testing was performed under standard laboratory conditions;  
actual performance may vary.  
 
PERFORMANCE DATA SHEET  
PERFORMANCE DATA SHEET FOR MODELS WCH-1000 AND WCH-1500  
CONTAMINANT REMOVAL DATA IMPORTANT NOTICE:  
Read this Performance Data Sheet and compare the capabilities of this unit with your actual  
water treatment needs. It is recommended that, before purchasing a water treatment unit, you  
have your water supply tested to determine your actual water treatment needs.  
Performance testing conducted by WQA. These systems have been tested according to NSF/  
ANSI Standard 53 and 42 for reduction of the substances listed below. The concentration of the  
indicated substances in water entering the system was reduced to a concentration less than or  
equal to the permissible limit for the water leaving the system, as specified in NSF/ANSI Standard  
53 and Standard 42.  
Testing was performed under standard laboratory conditions; actual performance may vary.  
Removal  
Removal  
Action Level  
Hardness  
Temp  
Inlet  
Max.  
Influent  
Challenge  
Concentration  
(mg/L)  
Filter  
Effluent  
Max.  
Influent  
Water Avg.  
(mg/L)  
Percent  
Reduction  
(%)  
Permissible  
Product Water  
Concentration  
(mg/L)  
Testing  
Compart.  
(°C)  
CaCO3  
(mg/L)  
Reduction  
Requirement  
Substance  
PH  
(mg/L)  
NSF/ANSI Standard 42-Aesthetic Effects  
Chlorine Taste and  
Odor Reduction  
2.0  
2.0+/-10%  
N/A  
97.5%  
N.A.  
N.A.  
20  
7.53  
>50  
NSF/ANSI Standard 53-Health Effects  
Copper pH 6.5  
Copper pH 8.5  
Mercury pH 6.5  
Mercury pH 8.5  
3.15  
3.10  
.006  
.006  
3.0+/-10%  
3.0+/-10%  
.87  
1.0  
85.0%  
85.4%  
92.8%  
89.9%  
1.3  
1.3  
16  
120  
22  
20  
19  
19  
20  
6.42  
8.42  
6.45  
8.55  
N/A  
N/A  
N/A  
N/A  
0.006+/-10%  
0.006+/-10%  
.0009  
.001  
0.002  
0.002  
140  
Cadmium pH 6.5  
.029  
0.03+/-10%  
.002  
96.6%  
0.005  
18  
20  
6.59  
N/A  
Cadmium pH 8.5  
Benzene  
.03  
.015  
2.9  
0.03+/-10%  
0.015+/-10%  
3.0+/-10%  
.004  
.003  
.770  
92.5%  
84.1%  
89.8%  
0.005  
0.005  
1
120  
130  
320  
20  
20  
20  
8.44  
7.58  
7.54  
N/A  
N/A  
N/A  
Toluene  
Tetrachloroethylene  
.014  
0.015+/-10%  
.003  
92.5%  
0.005  
340  
21  
7.56  
N/A  
Lead pH 8.5  
Lead pH 6.5  
.149  
.154  
.15+/-10%  
.15+/-10%  
.007  
.004  
95.4%  
98.7%  
.010  
.010  
98  
18  
21  
19  
8.5  
6.5  
N/A  
N/A  
 
PURCHASES MADE IN IOWA  
For purchases made in Iowa:  
This form must be signed and dated by the buyer and seller prior to consummation of this sale.  
This form should be retained on file by the seller for a minimum of two years.  
BUYER:  
SELLER:  
Name  
Name  
Address  
City  
Address  
City  
State  
Zip  
State  
Zip  
Signature  
Date  
Signature  
Date  
 
This warranty expressly excludes any defects or  
damages caused by accessories, replacement parts,  
or repair service other than those that have been  
authorized by Cuisinart.  
WARRANTY  
LIMITED THREE-YEAR  
WARRANTY  
This warranty does not cover any damage caused by  
accident, misuse, shipment or other ordinary household  
use.  
This warranty is available to consumers only. You are  
a consumer if you own a Cuisinart®  
This warranty excludes all incidental or consequential  
damages. Some states do not allow the exclusion or  
limitation of these damages, so these exclusions may  
not apply to you.  
Countertop Filtration System that was purchased at  
retail for personal, family or household use. Except as  
otherwise required under applicable law, this warranty is  
not available to retailers or other commercial purchasers  
or owners.  
CALIFORNIA RESIDENTS ONLY  
California law provides that for In-Warranty Service,  
California residents have the option of returning a  
nonconforming product (A) to the store where it was  
purchased or (B) to another retail store which sells  
Cuisinart® products of the same type.  
We warrant that your Cuisinart®  
Countertop Filtration System will be free of defects in  
materials and workmanship under normal home use for  
3 years from the date of original purchase.  
We suggest you complete and return the enclosed  
product registration card promptly to facilitate  
verification of the date of original purchase. However,  
return of the product registration card does not  
eliminate the need for the consumer to maintain  
the original proof of purchase in order to obtain the  
warranty benefits. In the event that you do not have  
proof of purchase date, the purchase date for purposes  
of this warranty will be the date of manufacture.  
If your Cuisinart®  
System should prove to be defective within the warranty  
period, we will repair it, or if we think necessary, replace  
it.  
The retail store shall then, at its discretion, either repair  
the product, refer the consumer to an independent  
repair facility, replace the product, or refund the  
purchase price less the amount directly attributable to  
the consumer’s prior usage of the product. If the above  
two options do not result in the appropriate relief to the  
consumer, the consumer may then take the product  
to an independent repair facility if service or repair  
can be economically accomplished. Cuisinart and not  
the consumer will be responsible for the reasonable  
cost of such service, repair, replacement, or refund for  
nonconforming products under warranty.  
Countertop Filtration  
California residents may also, according to their  
preference, return nonconforming products directly to  
Cuisinart for repair, or if necessary, replacement, by  
calling our Consumer Service Center toll-free at  
1-800-726-0190.  
To obtain warranty service, simply call our toll-free  
number 1-800-726-0190 for additional information from  
our Customer Service Representatives, or send the  
defective product to Customer Service at:  
Cuisinart  
150 Milford Road  
East Windsor, NJ 08520.  
Cuisinart will be responsible for the cost of the repair,  
replacement, and shipping and handling for such  
products under warranty.  
BEFORE RETURNING YOUR CUISINART®  
PRODUCT  
To facilitate the speed and accuracy of your return,  
please enclose $10.00 for shipping and handling of the  
product.  
If you are experiencing problems with your Cuisinart®  
product, we suggest that you call our Cuisinart®  
Service Center at 1-800-726-0190 before returning  
the product to be serviced. If servicing is needed, a  
Representative can confirm whether the product is  
under warranty and direct you to the nearest service  
location.  
Please pay by check or money order (California  
residents need only supply proof of purchase and  
should call 1-800-726-0190 for shipping instructions).  
NOTE: For added protection and secure handling  
of any Cuisinart® product that is being returned, we  
recommend you use a traceable, insured delivery  
service. Cuisinart cannot be held responsible for in-  
transit damage or for packages that are not delivered  
to us. Lost and/or damaged products are not covered  
under warranty. Please be sure to include your return  
address, daytime phone number, description of the  
product defect, product model number (located on  
bottom of product), original date of purchase, and any  
other information pertinent to the product’s return.  
Important: If the nonconforming product is to be  
serviced by someone other than Cuisinart’s  
Authorized Service Center, please remind the  
servicer to call our Consumer Service Center at  
1-800-726-0190 to ensure that the problem is  
properly diagnosed, the product is serviced with the  
correct parts, and the product is still under warranty.  
Your Cuisinart®  
Countertop Filtration  
System has been manufactured to the strictest  
specifications and has been designed for use with the  
authorized accessories and replacement parts.  
10  
 
11  
 
Coffeemakers  
Food  
Processors  
Toasters  
Rice Cookers  
Cookware  
Grills  
Cuisinart offers an extensive assortment of top quality products to make life in the  
kitchen easier than ever. Try some of our other countertop appliances and  
cookware, and Savor the good Life®.  
©ꢀ00ꢇ Conair Corporation  
Cuisinart® is a registered  
trademark of the Conair Corporation  
Cuisinart  
1ꢃ0 Milford Road  
East Windsor, NJ 0ꢆꢃꢀ0  
1-ꢆ00-ꢅꢀꢄ-01ꢇ0  
Printed in China  
Any trademarks or service marks of third parties  
0ꢇCE1ꢁꢇꢁꢄ  
referred to herein are the trademarks or service  
marks of their respective owners.  
IB-8895A  
 

Closet Maid Outdoor Storage 2890 User Manual
Cuisinart Blender CSB 78 User Manual
Cuisinart Egg Cooker CEC 7 User Manual
Curtis Microwave Oven RMW1480 User Manual
Danby Refrigerator DAR154BLSST User Manual
Delfield Refrigerator SAR User Manual
Edifier Enterprises Canada Speaker System R501 User Manual
Extron electronic Network Card RGB 320 User Manual
Flymo Trimmer 450 User Manual
GE Monogram Refrigerator ZICP360NX User Manual