Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof
2C
EDS Series Factory Sealed
Manual Motor Starting Switches
and Enclosures
Cl. II, Div. 1, Groups E, F, G
Cl. II, Div. 2, Groups F, G
Cl. III
Dust-Ignitionproof
Raintight
Wet Locations
NEMA 3, 7B*CD, 9EFG
Applications:
Factory sealed enclosures are installed in a
rigid metallic conduit system for surface
mounting adjacent to or remote from
equipment being controlled and are used:
• To prevent arcing of enclosed device
from causing ignition of a specific
hazardous atmosphere or atmospheres
external to the enclosure
• In industrial areas such as chemical
plants, oil and gas refineries, paint and
varnish manufacturing plants, gasoline
bulk loading terminals, grain elevators,
grain processing industries, coal
processing or handling areas, or metal
handling or finishing areas where
atmosphere may contain hazardous
gases and/or dust
EDSC2199
EDS2299
• In non-hazardous areas where sturdy,
durable enclosures are required
• In conjunction with magnetic starters or
contactors for remote control of motors
Manual motor starting switch enclosures
are used:
• For manual starting of small AC or DC
motors
Standard Materials:
Standard Finishes:
®
• Bodies – Feraloy iron alloy (U.S.);
Feraloy iron alloy – electrogalvanized and
copper-free aluminum (Canada)
• Shafts & bushings – stainless steel
• Sealing enclosures – copper-free
aluminum
aluminum acrylic paint
• Copper-free aluminum – natural
• Type 6 / 6 nylon – black
• Stainless steel – natural
Dimensions
Options:
• To provide manual starting and stopping
and, in the case of units with heaters,
motor running protection
In Inches:
Description
Suffix
For use in Group B hazardous
areas
Bodies and covers (single and two
gang units) – copper-free aluminum
Side View
GB*
SA
Features:
Factory sealed devices have many distinct
advantages:
• Reduce installation problems
• Eliminate external seals
• Lower installation costs
• Improve safety
• Mounting lugs and taper tapped hubs
with integral bushings
• Large machine screws for fastening
Hub
Size
3
Dim.
"h"
Dim.
"i"
13
/
4
/16
covers to bodies
• Lockout hole for padlock having /4
hasp is provided
15
1
/16
1
"
Front View
Single gang
Two gang
• Close tolerances in machining of wide,
mating flanges and journalled shafts and
bearings produce flametightness of
enclosure joints
• Dead end (EDS) or through feed (EDSC)
3
hubs – /4" or 1" sizes
Certifications and
Compliances:
• NEC/CEC
Class I, Division 1 & 2, Groups B*, C, D
Class II, Division 1, Groups E, F, G
Class II, Division 2, Groups F, G
Class III
Surface covers have same
length and width as single &
2 gang bodies.
• NEMA/EEMAC: 3, 7B*CD, 9EFG
• UL Standard: 1203
• CSA Standard: C22.2 No. 30
Dimensions are approximate, not for construction purposes.
1
*Seals must be installed within 1 /2" of each conduit opening in Division 1.
©
462
Cl. I, Div. 1 & 2, Groups B*, C, D
Cl. II, Div. 1, Groups E, F, G
Cl. II, Div. 2, Groups F, G
Cl. III
Explosionproof
Dust-Ignitionproof
Raintight
2C
EDS Series Factory Sealed
Manual Motor Starting
Switches and Enclosures
Wet Locations
NEMA 3, 7B*CD, 9EFG
With Cutler-Hammer Switches
Maximum HP Ratings
120–240
32
120
240
Poles Volts AC Volts DC Volts DC Volts DC Cat. #
1
1
1
1
2
1 hp
1 hp
/
4
hp
hp
/
4
hp
/
4
hp
hp
WEST MST01
WEST MST02
1
3
/
4
1 hp
/
4
Poles Hub Size in. Dead end Cat. # Through feed Cat. #
Single Gang
3
/
4
EDS21101 ➀
EDS31101 ➀
EDSC21101 ➀
EDSC31101 ➀
1
1
3
/
4
EDS21102 ➀
EDS31102 ➀
EDSC21102 ➀
EDSC31102 ➀
2
1
Two Gang
3
/
4
EDS22101 ➀
EDS32101 ➀
EDSC22101 ➀
EDSC32101 ➀
1
1
3
/
4
EDS22102 ➀
EDS32102 ➀
EDSC22102 ➀
EDSC32102 ➀
2
1
Heater Table (Cutler-Hammer)
Max. Motor
Full-Load
Amps
Max. Motor
Full-Load
Crouse-Hinds
Crouse-Hinds
Symbol Number
Symbol Number Amps
.43
W 1
W 2
W 3
W 4
W 5
W 6
W 7
W 8
W 9
W10
W11
W12
W13
W14
W15
W16
W17
W18
W19
W20
2.95
3.27
3.59
3.99
4.39
4.79
5.26
5.83
6.39
7.03
7.74
8.46
9.35
10.30
11.35
12.47
13.67
15.12
16.00
W21
W22
W23
W24
W25
W26
W27
W28
W29
W30
W31
W32
W33
W34
W35
W36
W37
W38
W39
.48
.53
.58
.64
.71
.78
.87
.95
1.03
1.15
1.27
1.35
1.51
1.67
1.83
1.99
2.23
2.47
2.71
➀ Includes one interchangeable heater. Select heater from the table
below individual listings and use symbol number as second section
of the Cat. No. Example: EDS2199-P5. Insert symbol 0 (zero) to omit
heater.
These heaters are for motors rated 40°C continuously. For motors
rated 50°C or 55°C, multiply full load motor current by 0.9 and use
this value to select heaters. Symbol 0 (zero) must be used to indicate
heater omitted.
1
*Add GB suffix. Seals must be installed within 1 /2" of each conduit opening for Group B usage.
©
464
|