CompuSTAR Automobile Alarm P2BSHLEDR User Manual

User Manual  
By Firstech LLC, Version: 1.1  
Applicable to the following remote(s);  
Pro 2BSHLEDR (2-Way 2 Button LED  
Remote)  
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;  
(1) This device may not cause harmful interference.  
(2) This device may accept any interference received, including interference that may cause undesired operation.  
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the  
user’s authority to operate this device.  
WWW.COMPUSTAR.COM  
1
 
Introduction  
Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of  
this system, we recommend that you fully review the following manual. Please note that this manual  
applies to the Pro 2-Way 2 Button Remote Starter system only. The P2BSHLED-S offers keyless entry  
and remote start. There may also be features listed in this manual that require additional installation or  
programming before they can become active. If you have any questions, please contact the original  
place of purchase. For further information you may also contact our customer support center by calling  
888-820-3690.  
Kit(s) Contents  
-
-
-
-
1 x Pro 2BSHLEDR Remote  
Starter Only Control Module  
1 x ANT-2WSH Antenna  
1 x Hood Pin  
Warranty Coverage  
Caution: The Manufactures warranty will be voided if this product is installed by anyone other than an  
authorized CompuStar Pro dealer. For complete warranty details visit www.compustar.com or the last  
page of this manual.  
Warranty registration can be completed online by visiting www.compustar.com. Please complete the  
registration form within 10 days of purchase. We no longer include a mail-in warranty registration card  
with each unit – registration must be done online. To verify that an authorized dealer installed your  
system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer  
invoice in a safe place.  
Remote Reference  
P2BSHLEDR (2-Way 2 Button Remote)  
Applicable to the following models;  
- P2BSHLED-S (remote start only)  
3
 
 
Quick Reference  
Valet Mode  
When servicing or loaning your vehicle to others, the CompuStar Pro system should be placed in Valet  
mode. Valet mode prevents the system from remote starting and disables all alarm functions.  
IMPORTANT: While in Valet mode the CompuStar Pro will still lock and unlock power lock systems.  
The system can be put into valet one of three ways;  
1. Turn the vehicles key to the ignition “on” position and tap lock/unlock and key/start buttons  
simultaneously for 0.5 seconds. The parking lights will flash once and the remote will beep and  
LED flash once to confirm the system is in valet mode. Repeat this process to take the system  
out of valet mode. The parking lights will flash twice and remote will beep twice and LED flash  
twice to confirm the system is out of valet mode.  
2. You can put the system into valet by turning the ignition key “on” and then “off” five  
times within 7 seconds. The parking lights will flash once to confirm the system is in  
valet mode. Shortly after the first flash, the parking lights will flash twice.  
3. (Optional Feature) If your system is set up for a secure valet option, you will not be able to put the  
system into valet until the proper code has been entered with the secure valet switch.  
Remote Maintenance – Battery Replacement  
The only regular maintenance this system requires is remote control battery replacement.  
No programming is required when replacing the battery.  
Two-Way Remote: Pro 2BSHLEDR  
First, remove the two small screw covers and Phillips screws located on the back of the remote. Once  
the screws have been removed, gently pull the remote apart being careful to not touch the circuit board.  
The P2BSHLEDR requires two CR2025 batteries. These specialty batteries can be purchased from your  
local CompuStar dealer or an electronics store.  
2 Button Remote Functions  
Additional  
Button  
Duration Programming Function / Description  
Required  
0.5  
seconds  
no  
Lock/Arm. Tap again to Unlock/Disarm the vehicle  
2.5  
seconds  
Trunk pop. Triggers the trunk release output and opens the  
vehicles trunk.  
no  
0.5  
yes, POC  
Aux 1. Triggers the auxiliary 1 output (most commonly used for  
seconds  
programming rear defrost or window roll-down).  
2.5  
seconds  
no  
no  
Activates the remote start. Repeat and remote start will shut off.  
0.5  
seconds  
Valet mode (see above for details)  
2.5  
seconds  
no  
Panic mode. Honks horn and flashes parking lights. (Optional)  
+
4
 
 
General System Functions  
The remote transmitter functions have been predetermined and programmed from the factory. The dual  
button configuration allows for keyless entry and/or remote start functionality as well as a few other  
functions. Although other CompuStar PRO systems have numerous button functions and capabilities,  
please keep in mind that your system has the option for future upgradeability to a 2-way system with a  
liquid crystal display.  
Sending Commands  
When in range, and the button has been pressed, the remote will beep, bright blue LED will illuminate,  
and vehicle’s parking lights will flash. For example, to send a remote start command from the  
P2BSHLEDR, hold down the key/start button for 2.5 seconds. The remote will beep and bright blue LED  
will come on solid and then flash.  
Receiving Commands  
The remote pager will receive beep and bright blue LED flash confirmation indicating confirmation of  
sending commands. For example, after sending the lock command, the pager will be beep and flash the  
LED once to confirm the vehicle has been successfully locked/armed.  
Active Lock/Arm and Unlock/Disarm  
Tap the lock/unlock button for 0.5 seconds to lock/arm and unlock/disarm. The remote bright  
blue LED will flash twice indicating the signal has been sent to the vehicle. Upon confirmation of  
lock/arm or unlock/disarm the remote will beep and flash the LED once or twice respectively. This feature  
is optional and may require additional programming and/or installation. Please check with your dealer for  
details.  
Automatic Transmission Remote Start Function  
Hold the key/start button for 2.5 seconds to remote start an automatic transmission vehicle. If you are in  
range and if the vehicle is ready to remote start, the vehicle parking lights will flash once. The remote will  
beep once to confirm proper remote starting and then 4 times if unlocked/disarmed. (6 times if  
locked/armed)  
If you are in range, the parking lights on the vehicle will flash three times followed by a certain number  
after that, there is a remote start error. Refer to the “remote start error diagnostic” on the last page of this  
manual for details. The remote will beep 3 times followed by 2 LED flashes.  
Upon receiving confirmation that your vehicle is running, the parking lights will light solid. The LED on the  
remote will flash every other second to represent remote start run time. The remote-start run-time can be  
programmed for 3, 15, 25, or 45 minutes - ask your local CompuStar dealer to adjust Option 2-7 if you  
would like a run-time other than 15 minutes (default).  
IMPORTANT: The vehicle’s key must be inserted into the ignition and turned to the “on” position prior to  
driving your vehicle. If the foot brake is depressed prior to the key being in the “on” position, the vehicle  
will shut off.  
Manual Transmission Remote Start Function (Reservation Mode)  
In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode.  
Reservation Mode must be set each and every time you want to remote-start a manual transmission  
vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the  
vehicle.  
5
 
 
IMPORANT:  
The transmission must be left in the neutral position.  
The vehicles windows must be rolled up.  
The vehicles door pins must be in working order.  
Do not install this remote start on a manual transmission vehicle that has a convertible or  
removable top.  
Do not set reservation mode or remote start with people in the vehicle.  
Activating Reservation Mode  
STEP 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking  
brake, and remove pressure from the foot brake.  
STEP 2: Remove the key from the vehicle’s ignition. The vehicle’s engine should remain running even  
after the key has been removed. If the vehicle does not remain running visit your local authorized  
CompuStar dealer for service.  
STEP 3: Exit the vehicle and close the door. The vehicle’s engine should shut off within upon closing the  
last door. If the vehicle’s engine does not shut off, your door trigger may be functioning improperly. Do  
not use the remote-start feature and take your vehicle to a local authorized CompuStar dealer for  
service.  
IMPORTANT: By default, the system will lock/arm the vehicle upon setting reservation mode. Take care  
to not lock your keys inside the vehicle.  
Cancelling Reservation Mode  
Reservation mode will be cancelled for the following reasons;  
You did not activate the parking brake prior to turning off the ignition.  
You pressed the foot brake after the key was removed from the ignition.  
You released the parking brake after the key was removed from the ignition.  
You entered valet mode, opened the vehicles door, hood, or trunk.  
Reservation Mode Settings  
Reservation mode settings can be programmed with Option 1-6. It is recommended that reservation  
mode settings are programmed by your local authorized CompuStar dealer.  
Default 1: Locks doors when reservation mode is set.  
Option 2: Does not lock doors when reservation mode is set.  
Option 3: Reservation mode sets 10 seconds after the last door is closed, as opposed to immediately.  
This option will allow you to access the vehicles rear doors, trunk or hatch prior to the system setting  
reservation and passively locking/arming.  
Trunk Release  
Hold the lock/unlock button for 2.5 seconds to release the trunk or hatch. If you are in range,  
the remote will beep twice and the LED flash twice indicating that the trunk release command  
has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature that may  
require additional parts and labor.  
Auxiliary Outputs/Window Roll-Down/Sliding Doors  
Your system is equipped with one additional output that can be configured to control windows, open  
power sliding doors, open a power sliding moon roof, or even turn on a rear defroster. These outputs can  
be configured for pulsed, timed or latched settings. Your authorized CompuStar dealer can set these  
6
 
 
outputs up accordingly. Using the auxiliary output to control additional vehicle functions will require  
additional parts and can be rather labor extensive.  
Tap the key/start button for 0.5 seconds to trigger auxiliary output 1. The remote will beep once  
and LED flash once indicating that the auxiliary output has been triggered.  
By default, the system is in secure auxiliary mode. This feature must be turned off to use auxiliary 1 with  
the P2BSHLEDR. To turn off secure auxiliary, ask your authorized CompuStar dealer to turn on Option  
4-5 to setting II.  
Anti Grind/Starter Kill  
The optional anti-grind/starter kill feature prevents you from accidentally grinding your vehicle’s starter  
motor when taking over with the key. This feature requires additional installation and programming. Also  
your dealer can program a basic security feature that prevents your vehicle from starting when it is  
locked/armed. Please see your dealer for more details.  
Secure Valet Switch  
The optional Secure Valet Switch prevents the remote start from being put into valet mode through  
cycling the ignition on/off five times. The Secure Valet Switch is more secure than traditional toggle /  
valet switches because it requires a two-digit code. Follow the below procedures to program your secure  
valet pass code:  
STEP 1: Turn on Option 3-10-III. (Dealer programmed option)  
STEP 2: Turn ignition key to the “on” position.  
STEP 3: Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash  
rapidly with successful completion of this step.  
STEP 4: Enter the first digit of the desired two digit pass code by depressing the switch the number of  
times that coordinates with the desired first number. For example, to enter 3, depress the switch 3 times,  
then wait.  
STEP 5: The LED will confirm the first number by flashing BLUE slowly. Once the LED begins to flash  
rapidly, enter your second number by repeating step 4.  
STEP 6: Turn the ignition off - the Secure Valet Switch is now programmed. Follow steps 3 – 5 to enter  
your Secure Valet code.  
7
 
 
Remote Coding / Programming Routine(s)  
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any  
operations. All remotes must be coded at the same time.  
Programming P2BSHLEDR  
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the  
Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the  
successful completion of this step.  
STEP 2: Within a 3 second period after cycling the ignition for the 5th time, pressing the single button  
once for 0.5 seconds. The parking lights will flash once to confirm the transmitter has been coded.  
Exiting Programming: Programming is a timed sequence. The  
parking lights will flash twice signaling the end of programming mode.  
Programming Multiple Remotes: After the confirmation flash given in  
step 2, code additional remotes by pressing the single button on  
remote. The parking lights will flash once confirming each additional  
remote. All systems can recognize up to three remotes.  
Remote Start Error Diagnostic  
If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following  
those three flashes the parking lights will flash again corresponding to the error table.  
Number of  
Parking Light  
Flashes  
Remote Start Error  
1
2
3
4
5
6
7
8
Motor running  
Key in ignition on position  
Door open (manual transmission only)  
Trunk open  
Foot brake on  
Hood open  
Reservation off (manual transmission only)  
Tach or voltage sensing failure  
We recommend that you do not attempt any repairs on your remote starter. Contact your dealer or call us  
directly.  
8
 
 
Limited Lifetime Warranty  
Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and  
workmanship under normal use and circumstances for the period of time that the original owner of this  
product owns the vehicle in which it is installed; except that the remote controller unit for the period of  
one year from the date of installation to the original owner of this product. When the original purchaser  
returns the product to the retail store where it was purchased or prepaid postal to Firstech, LLC., 21911  
68th Avenue South, Kent, WA 98032, USA within the warranty period, and if the product is defective,  
Firstech, LLC, will at its option repair or replace such.  
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY  
THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE  
THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY  
AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS  
FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR  
PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE  
MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR  
LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY  
CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF  
EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE.  
NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO  
REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.  
Some states do not allow limitations on how long an implied warranty will last or the exclusion or  
limitation on how long an implied warranty will last or the exclusion or limitation of incidental or  
consequential damages. This warranty gives you specific legal rights, and you may also have other  
rights, which vary State to State.  
Firstech, LLC. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING  
BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES  
FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC  
OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of Compustar. NOT  
WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO  
REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.  
Your Warranty  
The product's warranty is automatically void if the date code or serial number is defaced, missing or  
altered. This warranty will not be valid unless you have completed the registration card at  
9
 
 
Notes:  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
10  
 
 
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
11  
 
Toll Free: 888-820-3690  
21911 68th Ave S  
Kent, WA 98032  
12  
 

Compaq MP3 Player SM CMD3006 User Manual
Continental Electric Fan CE27205 User Manual
Cooper Lighting Landscape Lighting UTR50SR2554 User Manual
Craftsman Pressure Washer 919762000 User Manual
Craftsman Router 315175341 User Manual
Creda Cooktop H050E User Manual
Cub Cadet Snow Blower 31AH4Q3G100 User Manual
Edimax Technology Network Router BR 6218Mg User Manual
Frigidaire Air Conditioner FRS093LS1 User Manual
GE Network Card superbus 2000 concord 4 gsm module User Manual