QuickSpecs
Overview
HP L1740 Flat Panel Monitor
1. Auto Adjust
2. Menu/Select
4. OSD Navigation/Input Select
5. Power
3. OSD Navigation/Input Select
Models
Part Number: PL766AA#ABA
HP Care Pack Services
Next Day Onsite Response, 3 years
Next Day Onsite Response, 4 years
Next Day Onsite Response, 5 years
Basic 8-5, 4 Hour Onsite Response, 3 years
Basic 8-5, 4 Hour Onsite Response, 4 years
Basic 8-5, 4 Hour Onsite Response, 5 years
Post Warranty Service, Next Day Onsite
H2754E
U7934E
U7935E
U8317E
U8318E
U8319E
U4925PE
NOTE: For additional information on HP Care Pack Services, please see http://www.hp.ca/hps/carepack/.
DA - 12127
Canada — Version 14 — March 29, 2006
Page 1
QuickSpecs
Technical Specifications
HP L1740 Flat Panel Monitor
Default Colour
6500° Kelvin
Temperature
On Screen Display (OSD) Buttons and Switches
Controls
4-button OSD (auto-adjust, menu, minus, plus); power on/off; second-level
OSD buttons include dual-input switch
Languages
English, Spanish, French, German, Dutch, Italian, Simplified Chinese
User Controls
Size and positioning, contrast, brightness, clock, clock phase,
selectable colour temperature, serial number, mode displayed, sleep timer,
input selection, factory reset, individual colour contrast, full-screen
resolution
Power
Power Supply
Input Power
Auto-ranging, 90 to 265 VAC; internal power supply
100 ~ 240 VAC
1.5 A maximum
50 ~ 60 Hz
Nominal Current
Frequency
Avg. Power Consumption ~33 watts (when displaying standard office applications)
Typ. Power Consumption < 40 watts
Max. Power Consumption < 60 watts
Power Saving Mode
Off Mode
< 2 watts
< 2 watts
Power Cable Length
74.8 in (1.9 m); detached
Mechanical
Dimensions (H x W x D) Packaged
Unpacked with stand
17.5 x 17.5 x 8.5 in (44.5 x 44.5 x 21.6 cm)
13.8 x 14.6 x 10.5 in (35.1 x 37.1 x 26.7 cm)
(minimum height)
Unpacked with stand
(maximum height)
19.3 x 14.6 x 9.75 in (49.0 x 37.1 x 24.8 cm)
Base area (footprint)
11.75 x 9.75 in (29.8 x 24.8 cm)
Panel only (without stand) 12.4 x 14.6 x 2.5 in (31.5 x 37.1 x 6.4 cm)
Weight
Packaged
19.5 lb (8.8 kg)
15.4 lb (7.0 kg)
Unpacked with stand
Panel Only (without stand) 8.3 lb (3.76 kg)
17 mm left and right, 17 mm top, and 24 mm bottom
-5° to +35°
Bezel Width
Tilt Range
Swivel Range
Height Adjustable
Pivot Rotation
Base
± 170° horizontal swivel
Yes (5.1 in/13 cm adjustment range)
Yes, 90° into portrait orientation
Ships attached and is removable (four screws)
DA - 12127
Canada — Version 14 — March 29, 2006
Page 3
QuickSpecs
Technical Specifications
HP L1740 Flat Panel Monitor
Environmental
Temperature – Operating 41° to 95° F (5° to 35° C)
Temperature –
Non-operating
-4° to 140° F (-20° to 60° C)
Humidity – Operating
20% to 80%, non-condensing
5% to 90%
Humidity –
Non-operating
Altitude – Operating
0 to 12,000 ft (0 to 3,658 m)
0 to 40,000 ft (0 to 12,192 m)
Altitude –
Non-operating
Options
HP Silver Flat Panel
Speaker Bar – Part
number: EE418AA
Powered directly by the monitor or PC, the Speaker Bar seamlessly attaches
to the monitor's lower bezel to bring full audio support to select HP flat panel
monitors. Features include dual speakers with full sound range and external
jack for headphones. Sold separately. For more information, refer to the HP
Silver Flat Panel Speaker Bar QuickSpec document.
HP Compaq 7000 Series Allows mounting of a 15-, 17- or 19-inch HP flat panel monitor and an HP
Ultra-slim Desktop Compaq dc7600 Ultra-slim Desktop PC on a single stand for the
Integrated Work Centre convenience of an "all-in-one" form factor. Sold separately. For more
Stand – Part number:
DL641B
information, refer to this product's QuickSpec document.
HP Flat Panel Monitor
Quick Release – Part
number: EM870AA*
An easy-to-use, VESA-compliant, flat panel monitor mounting solution that
allows you to quickly and securely attach a flat panel monitor to a variety of
stands, brackets, arms or wall mounts. For more information, refer to this
product's QuickSpec document.
*NOTE: The HP Flat Panel Monitor Quick Release has been designed to support a maximum of up to
24 lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight limit
for all devices mounted, i.e. the combined weight of the monitor and a second device such as the HP
Compaq t5720 Thin Client cannot exceed 24 pounds. Because mounting surfaces vary widely and the
final mounting method and configuration may vary, mounting fasteners are not supplied (other than the
VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or
construction professional to determine the appropriate type and quantity of mounting fasteners required
for your application and to ensure that your mounting solution is properly installed to support applied
loads.
Other
Accessories Included
Software
VGA cable, AC power cord, USB cable, user CD-ROM
HP Display LiteSaver feature allows you to schedule Sleep mode at preset
times to help protect the monitor against image retention, drastically lower
power consumption and energy costs, and extend the lifespan of the
monitor.
User Guide Languages
Warranty Languages
Colour
English
English
Carbonite black and silver (two-tone)
VESA External Mounting Yes (standard 4 hole pattern, 100 mm); base must first be removed
Kensington Lock-Ready Yes
DA - 12127
Canada — Version 14 — March 29, 2006
Page 4
QuickSpecs
Technical Specifications
HP L1740 Flat Panel Monitor
Certification and
Compliance
Australian ACA Approval, Canadian Requirements/CSA, CE Marking, China CCIB/CCEE Approval,
CISPR Requirements, Eastern European Approvals, Energy Star Compliant, FCC Approval, German
Ergonomic (TUV and GS Mark), ISO 13406-2 Compliant (Pixel Defect Guidelines), Mexican NOM
Approval, MPR-II Compliant, PC2001 Compliant, PC99 Certified, S. Korean MIC Approval, Taiwan
BSMI Approval, TCO 99 or 03 depending on region (emissions, ergonomics, environment), TUV-Ergo,
UL Listed, VCCI Approvals, Microsoft® Windows® Certification
Compatibility
VESA Video Signal Standard (VSIS) Compliant video cards have been tested and proven compatible for
use with the HP L1740 Flat Panel Monitor. Recommended for use with HP products.
Service and Warranty
Three years parts, labour, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement
options may include second business day on-site service, or next business day direct replacement, at
HP's sole discretion. With direct replacement, HP will ship a replacement display product directly to you.
Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as
the replacement. Certain restrictions and exclusions apply. For details see your product warranty or
contact HP Customer Support.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries.
All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance
may vary either higher or lower.
The information contained herein is subject to change without notice. Microsoft and Windows are registered trademarks or
trademarks of Microsoft Corporation in the U.S. and/or other countries. The only warranties for HP products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 12127
Canada — Version 14 — March 29, 2006
Page 5
|