User' s Manual
M7 3 0 V LCD Monit or
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2
INTRODUCTION ............................................................................................... 3
Product Description ................................................................................... 3
Package Overview ...................................................................................... 3
Recommended Use of the Monitor ............................................................. 4
The Guideline of Operation Angle of LCD Monito .................................... 5
The Camera Function in LCD Monitor ....................................................... 6
CONTROLS AND ADJUSTMENTS...................................................................... 7
Front User Controls .................................................................................... 7
OSD Main menu ......................................................................................... 8
Auto-Tune ........................................................................................ 8
Color ............................................................................................... 9
Image ............................................................................................... 9
OSD Setting ................................................................................... 10
Language ....................................................................................... 10
Reset .............................................................................................. 10
Source ........................................................................................... 10
Audio setting.................................................................................. 10
Advanced ...................................................................................... 10
Energy Declaration ................................................................................... 11
TROUBLESHOOTING ....................................................................................... 12
TECHNICAL INFORMATION ............................................................................ 13
Compatibility ............................................................................................ 13
VGA Pin Assignment ..................................................................... 13
VGA Preset Modes ........................................................................ 13
Other Modes ................................................................................. 13
DVI Pin Assignment....................................................................... 14
DVI Modes .................................................................................... 14
Specification ............................................................................................. 15
1
♦ ♦ ♦
IMPORTANT SAFETY INSTRUCTIONS
Please read the following instructions carefully. This manual should be retained
for future reference.
1. To clean the LCD Monitor screen make sure the Monitor is in the power off
mode. Unplug the Monitor from its power source before cleaning it. Stand
away from the LCD Monitor and spray cleaning solution onto a rag. Without
applying excessive pressure clean the screen with the slightly dampened rag.
2. Do not place your LCD Monitor near a window. Exposing the Monitor to
rain, water, moisture or sunlight can severely damage it.
3. Do not place anything on top of the Monitor/PC signal cord. Make sure the
cord is placed in an area where it will not be stepped on.
4. Do not apply pressure to the LCD screen. Excessive pressure may cause
permanent damage to the display.
5. Do not remove the cover or attempt to service this unit by yourself. You may
void the warranty. Servicing of any nature should be performed only by an
authorized technician.
6. Safe storage of the LCD Monitor is in a range of minus 20 to plus 60 degrees
Celsius. Storing your LCD Monitor outside this range could result in permanent
damage.
7. If any of the following occurs immediately unplug your Monitor and call an
authorized technician.
•
•
•
The power or Monitor-to-PC signal cord is frayed or damaged.
Liquid has been spilled into the Monitor, or it has been exposed to rain.
The Monitor has been dropped or the case has been damaged.
Notice :
Actual safety specifications please refer to the label on the back of monitor.
2
♦ ♦ ♦
INTRODUCTION
Product Description
Your LCD monitor incorporates high quality display, solid structure and multimedia
savvy. With user-friendly interfaces, user will enjoy the professional PC application
as well as Audio Video performances. In addition, it has power-saving capabilities
and emits no X-ray radiation.
The features are:
• 17" TFT Liquid Crystal Display
• Compatible with IBM VGA, VESA
• Direct VGA input
• Direct DVI input
• USB 2.0 Hub inside
• Equipped with Built-In Camera (640 X 480) with high quality image lens, 1/4”
Color VGA CMOS, and full Space Microphone
• SXGA 1280x1024 resolution, up to 16M colors
• DPMS (power saving) Compatible
• Built in universal power supply
• Anti-glare display
• On-Screen Display (OSD) controls and adjustments
• 3W x2 Audio function inside the monitor
• SRS Surround Sound System
Package Overview
Your monitor package contains:
CD x 1
VGA Cable
DVI Cable
LCD Monitor
USB Cable
Power Cord
Audio Cable
CAUTION
Keep the shipping carton in case the need arises to store or transport the unit. Let the
LCD lie on its face when you put it into the carton.
3
♦ ♦ ♦
INTRODUCTION
Recommended Use of the Monitor
• Power
– Use the type of power indicated on the marking label.
• Plugs
– Do not remove any of the prongs of the monitor's three-pronged power plug.
– Disconnect the power plug from the AC outlet if you are not going to use it for an
indefinite period of time.
• Power cords
– Use the proper power cord with correct attachment plug type. If the power source
is 120 VC, use a power cord that has UL and CSA approvals. If the power source
is a 240 VAC supply, use the tandem (T blade) type attachment plug with ground
conductor power cord that meets the respective European country's safety
regulations, such as VDE for Germany.
– We recommend using the power cord supplied with the product. However, if
another type of power cord is required power cord H05VV-F or VW-1, 18AWG x
3G should be used.
– Do not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 7 amperes.
– Ensure that the total ampere ratings on all units plugged into the extension cord is
not above the cord's rating.
– If the power supply cord which came with your monitor is to be connected to the
PC instead of the wall outlet, this equipment should be used with UL/TUV approved
computers with receptacle rated 100~ 240V AC, 50/60Hz, 1.1A (minimum).
– Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord.
• Environment
– Place the monitor on a flat level surface.
– Place the monitor in a well-ventilated place.
– Keep the monitor away from:
rain or water
overly hot, cold or humid places
sunlight
dusty surroundings
equipment that generates strong magnetic fields
4
♦ ♦ ♦
INTRODUCTION
The Guideline of Operation Angle of LCD Monitor
1. Unpack the monitor from Carton box.
2. Put the monitor on a flat table.
3. To hold the base of monitor with one
hand and pull the frame of panel of
monitor, let the panel up with base
on the vertical position.
4. To adjust the monitor in a
comfortable view position, please
change the tilt angle of panel of
monitor in an optimal position.
5. The normal operation range is
forward 5 degrees to backward 47
degrees. Not allow to operation over
than 47 degree in back direction.
6. To a d ju st th e m o n ito r in a
comfortable view position, please
change the high range of panel of
monitor in an optimal position. The
normal operation range is up 55
degrees and down 18 degrees.
5
♦ ♦ ♦
INTRODUCTION
The Camera Function in LCD Monitor
The Built-in Camera and Microphone are useful tools which enable internet study,
net meeting, chat, and other entertainment purposes & functions.
Camera
Microphone
LED
The Scope of View Angle
The Guideline for Adjusting the
Angle of Camera
0°
UP 45°
90° Position
135° Position
180° Position
6
♦ ♦ ♦
CONTROLS AND ADJUSTMENTS
Once you have installed this monitor with your system, please read the instructions
in this section, It provides you some guidelines on how to use the monitor more
efficiently, and lead you through the various functions of the user controls and explain
how to adjust the monitor to your personal preference.
Front User Controls
(1) "ESC" button
To close the OSD(On Screen Display) manual and to escape function or audio mute.
(2) Up ∆" button
To adjust the selected OSD function or the contrast or select DVI/VGA input.
(3) Down " " button
To adjust the selected OSD function or the contrast directly.
(4) Enter " " button
To display the OSD manual and select functions.
(5) Power Switch
To turn the monitor On or Off.
(6) Power LED Indicator
The LED Indicator is for showing the ON/Off of power
(7) Brightness Control (Side View)
To adjust the brightness directly.
(8) Volume Control (Side View)
To adjust the Volume directly.
(9) Earphone Plug-in (Side View)
7
♦ ♦ ♦
CONTROLS AND ADJUSTMENTS
On Screen Display (OSD) Main menu
1. Press " " to open the OSD main menu.
2. Use the " " and " ∆ " arrows to move through the displayed functions.
3. Press " " to confirm your selected function.
When the main screen starts, there are following functions to choose
1.
Auto-Tune (It is disabled in DVI
ADVANCED AUTO TUNE PATTERN
PROGRAM USAGE GUIDE
Mode)
• As some VGA Cards do not match the
VESA standard they cannot output 0.7
V p-p VESA standard. Therefore, you
need the "ADVANCED AUTO TUNE
PATTERN PROGRAM" to modify the
parameters of the monitor to match the
different output level of the VGA card.
• AUTO_TUNE.exe is used for Windows
the display mode adjustment. It will
adjust the VGA input level and video
quality to optimum.
When selecting “Auto-Tune”, wait for a
few seconds, the monitor will auto-ad-
just Clock, Phase, H-position and V-po-
sition to their optimal level.
• DOS_TUNE.exe is used for 720x400
70Hz & 640x 350 70Hz under DOS
mode adjustment. It will adjust the
video quality to optimum.
• For the adjustment, please execute the
program, then select the "Auto Tune"
function in the OSD menu, to get the
optimal picture.
8
♦ ♦ ♦
CONTROLS AND ADJUSTMENTS
3.
Image
2.
Color
To enter this item menu, here are some
items which can be adjusted as below.
To enter this item menu, you can choose
either the Auto Color, Color 1, Color 2,
Color 3, Best Color and User mode.
Au to G e o m e try It is
disabled in DVI Mode
Auto Color It is disabled in
DVI Mode
Clock It is disabled in DVI
Mode
Color 1
Phase It is disabled in DVI
Mode
Color 2
H.Position It is disabled in
DVI Mode
Color 3
V.Position It is disabled in
DVI Mode
Best Color
Smooth
Zoom
User
Full
Original
Customize
9
♦ ♦ ♦
CONTROLS AND ADJUSTMENTS
7.
Source
4.
OSD Setting
To enter this item menu, it can be
adjusted OSD position and OSD timeout.
Choosing Input Signal mode.
VGA
H. Position
V. Position
Center
DVI
8.
Audio setting
To enter this item menu and you can
adjust Surround, Mute or Source.
OSD timeout
5.
Language
Surround
Mute
To select the OSD languages between
English, German, French, Spanish,
Italian, Chinese, Japanese or Russian .
~
Source
Audio 1 Audio 2
9.
Advanced
6.
Reset
To enter this item menu, you can select
Text mode or Motion Picture Mode.
• To select "Yes" or "No".
• Choosing Reset to call-back all the
settings for the current Input Signal
mode to factory preset.
Text
Motion Picture
10
♦ ♦ ♦
CONTROLS AND ADJUSTMENTS
Energy Declaration
This monitor is equipped with a function for saving energy, which supports the
VESA Display Power Management Signaling (DPMS) standard. This means that
the monitor must be connected to a computer. The time settings for switching to
a power saving mode are adjusted from the system unit by software. From the first
indication of inactivity to power saving position the total time must not be set to
more than 70 minutes.
1. VESA Power-Management Proposal
VESA DPMS Standard
H. sync
Off
V. sync
On
Video
Blank
Blank
Blank
State
Stand-by
Suspend
Off
On
Off
Off
Off
2. Power Consumption (120/230 Vac)
NUTEK
VESA state
On
LED indicator Power Consumption
Normal
operation
Green
Amber
Amber
< 60W
≤4W
Power Saving
Position A1
Suspend
Off
Power Saving
Position A2
≤3W
11
♦ ♦ ♦
TROUBLESHOOTING
Troubleshooting
If you are experiencing trouble with the LCD display refer to the following. If the
problem persists please contact your local dealer or our service center.
The monitor does not respond after you turn on the system.
• Check if the monitor is turned on.
• Turn off the power and check the monitor power cord and signal cable are properly
connected.
The characters on the screen are dim.
• Refer to the Controls and Adjustments section to adjust the brightness
(BRIGHTNESS on the OSD sub-menu.)
The screen is blank.
• During use the monitor screen may automatically turn off as a result of the Power
Saving feature. Press any key to see if the screen comes back.
• Refer to the Controls and Adjustments section to adjust the brightness
(BRIGHTNESS on the OSD sub-menu.)
The screen flashes when it initializes.
• Turn off the monitor and turn it on again.
• Refer to the Controls and Adjustments section to reload the default setting (RESET
on the OSD main-menu.)
Partial image or incorrectly displayed image
• Check to see if the resolution of your computer is higher than that of the LCD
display
• Reconfigure the resolution of your computer to make it less than or equal
to1280x1024 or to make sure reflesh rate is under 75Hz.
Image has vertical flickering line bars
• Use "Clock" to make an adjustment
• Check and reconfigure the display mode of the vertical refresh rate of your graphic
card to make it compatible with the LCD display
Image is unstable and flickering
• Use "Phase" to make an adjustment.
Signal out of Range:
• When the input signal is outside the normal specifications the screen will display
a "Signal out of Range" message.
No Signal Input:
• The "No Signal Input" message indicates that the cable may not be plugged
properly into the host system.
WARNING
Do not disassemble the monitor. Contact your dealer if needed.
12
♦ ♦ ♦
TECHNICAL INFORMATION
Compatibility
This LCD monitor supports multiple operating platforms such as IBM compatible
computers. This section provides you with detailed information on pin assignment
of the D-Sub/DVI connector and the preset timing chart of the prevailing video
standards.
VGA Pin Assignment
Signal
15 Pin Mini D-Sub
Red Video
Green Video
Blue Video
Horizontal Sync
Vertical Sync
Ground
1
2
3
13
1
5
6
11
10
16
14
5,6,7,8,10,11
Male Mini D-15 Connector
No Connection
SDA (DDC)
SCL (DDC)
N.C.
4
12
15
9
VGA Modes
Horizontal
Frequency(KHz)
Vertical
Resolution
VCLK(MHz)
Standard
Frequency(Hz)
70.000
59.940
72.800
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.013
75.025
75.000
720*400
640*480
640*480
640*480
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
1280*1024
1152*864
28.322
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
108.000
31.469
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.746
60.023
63.981
79.976
67.500
IBM VGA
IBM VGA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Other Modes
640*350
@70 Hz
@70 Hz
@70 Hz
@72 Hz
640*480
800*600
1024*768
1152*864
1280*720
1280*960
1280*1024
1280*1024
@60 Hz, 70 Hz, 72 Hz
@60 Hz
@60 Hz, 70 Hz, 72 Hz, 75 Hz
@72 Hz
@70 Hz
13
♦ ♦ ♦
TECHNICAL INFORMATION
DVI Pin Assignment
DVI Connector
Pin Signal Assignment
Pin Signal Assignment
T.M.D.S. Data 1-
10 T.M.D.S. Data 1+
Pin Signal Assignment
17 T.M.D.S. Data 0-
18 T.M.D.S. Data0+
1
2
3
4
5
6
7
8
T.M.D.S. Data 2-
T.M.D.S. Data 2+
9
T.M.D.S. Data 2/4 Shield 11 T.M.D.S. Data 1/3 Shield 19 T.M.D.S. Data 0/5 Shield
No Connect
No Connect
DDC Clock
DDC Data
12 No Connect
20 No Connect
13 No Connect
21 No Connect
14 + 5V Power
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-
15 Ground (for + 5V)
16 Hot Plug Detect
No Connect
DVI Modes
Horizontal
Frequency(KHz)
Vertical
Standard
Resolution
VCLK(MHz)
Frequency(Hz)
640*480
800*600
25.175
40.000
65.000
108.000
31.469
59.940
60.000
60.000
60.000
IBM VGA
VESA
37.879
48.363
63.981
1024*768
1280*1024
VESA
VESA
14
♦ ♦ ♦
TECHNICAL INFORMATION
Specifications
LCD Panel
17" TFT LCD module with wide-viewing angle, 0.264(H)x0.
264(V)mm pixel
[Monitor]
Effective display size
Resolution (max.)
Displayable colors
Brightness
17." (43.2cm diagonal)
SXGA 1280x1024
16M True color
400 cd/m2
Contrast ratio
Response time
500:1
16ms
Scan Frequency(VGA)
Scan Frequency(DVI)
Audio Input
Horizontal: 30 to 80kHz Vertical: 59 to 75 Hz
Horizontal: 30 to 66kHz Vertical: 59 to 61 Hz
2V(RMS). Max
Audio Output
Stereo, 3W x 2
User controls
Power Consumption
Power/Enter/Up/Down/Escape/Volume
≤60W
≤4W Power Saving,
≤3W Power switch off
Analog 0.7V peak to peak separate
TTL Positive or Negative
Input signal
Power Supply
Plug & Play
USB Hub
100~ 240V,50/60Hz (automatically)
VGA: DDC 2Bi
DVI: DCC 2B+
Compatible transmissio rate in high speed 480Mb/sec, full
speed 12Mb/sec and low speed 1.5Mb/sec
Down Stream Port x 3 transmission
Per down stream port support current 500mA
[Camera]
pixels
RGB
1/4" Color VGA CMOS 640x480
24bits
resolution
Supports160x120,176x144,320x240,352x280,640x480
20cm to Infinity(Minimum)
Non-directional electric
Object Distance
Microphone Type
Audio Sample rate
8KHz/16KHz
[Dimension & Weight]
Size (WxDxH)
Weight (net)
40.8x209.2x474mm
6.6 Kgs
[Operating Environment]
Temperature
5° C~ 35° C
Humidity
20%~ 80% (non-condensing)
[Storage Environment]
Temperature
Humidity
-20° C~ 60° C
10% ~ 90% (non-condensing)
Note : Specifications are subject to change without notice
15
♦ ♦ ♦
|