American Standard Hot Tub T038990 User Manual

Installation

Instructions

T038.990

DECK MOUNT

TUB FILLERS

TROPIC DIVERTER & PERSONAL

SHOWER TRIM KITS

with EverClean™ Finish

Congratulations on purchasing your American Standard

faucet with EverClean finish found only on American

Standard faucets.

Certified to comply with ANSI A112.18.1

U.S. Patent No. D403,750

EverClean Finish

• One wipe effortlessly removes spots

M968897

• Eliminates the need for cleaners and scrubbing

• Permanent surface protectant remains beautiful

for the life of the faucet

• EverClean™ available on: Polished Chrome, Satin Nickel,

Stainless Steel, Polished Brass (or any combination of these finishes)

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

INSTALL HANDLE ADAPTER

Remove DIVERTER GUARD (1) from valve.

Place the ESCUTCHEON SEAL (7) into groove of DECK ADAPTER (2).

Align the HANDLE STEM (3) with the SLEEVE (4) as necessary.

GROOVE

Thread the HANDLE ADAPTER (5) into the VALVE BODY (6) until

the DECK ADAPTER (2) contacts tight against the finished

mounting surface.

INSTALL HANDLES

Push ADAPTER (1) on VALVE STEM (2), so that

the hole of the ADAPTER (1) without a spline is

facing up. Fig. A. Tighten STEM SCREW (3) to

secure ADAPTER (1).

THREAD ON

TO DECK

ADAPTER

Find correct position of LEVER HANDLE ASSEMBLY (4)

by adjusting male teeth on ADAPTER (1) to female teeth

in HANDLE (4).

TOP

Thread LEVER HANDLE ASSEMBLY (4) onto DECK

ADAPTER (5) until snug against mounting surface.

SPLINE END DOWN

Fig. A.